0
On models 1996 onwards (this might also apply to earlier models), there are vertical and horizontal alignment screws on the front part of the engine compartment. The position of these alignment screws, and the associated water level indicators that you can use to align the headlights are illustrated in the Nissan Altima Owner's Manual, which can be downloaded for free from Nissan's website at: http://www.nissan-techinfo.com/nissan/deptog.asp?dept%5Fid=40
What else can I help you with?
How do you aim the headlights of a 2003 Nissan Pulsar n16?
To aim the headlights on a 2003 Nissan Pulsar N16, first park the vehicle on a level surface about 25 feet away from a wall. Turn on the headlights and mark the center of the light beam on the wall with tape. Adjust the vertical aim by turning the adjustment screws located on the headlight assembly until the top of the beam is aligned with the tape mark. Ensure the horizontal aim is correct by checking that the beams are centered relative to the vehicle's width.
How do you aim headlights on 2001 eclipse?
there is no adjustments on the headlights.
How do you adjust headlights on q 1989 Plymouth acclaim?
To adjust the headlights on a 1989 Plymouth Acclaim, first park the car on a level surface about 25 feet from a wall. Turn on the headlights and mark the horizontal and vertical centerlines of the beams on the wall. Then, locate the adjustment screws near the headlight assembly; typically, one adjusts the vertical aim and the other adjusts the horizontal aim. Turn the screws as needed until the beams align with the marks on the wall.
How do you aim headlights on 2004 Chevy Malibu?
Specify what you mean.
How do you adjust headlights no a 2009 Nissan murano?
To adjust the headlights on a 2009 Nissan Murano, park the vehicle on a level surface about 25 feet from a wall. Measure the height of the headlight center from the ground and mark this height on the wall with tape. Turn on the headlights, then adjust the vertical aim by using a screwdriver to turn the adjustment screws located on the headlight assembly until the top of the beam is aligned with the marked line on the wall. For horizontal adjustments, ensure the beam is centered to the vehicle's width.
How do you adjust headlight on 1998 240sx?
To adjust the headlights on a 1998 Nissan 240SX, first, park the car on a level surface about 25 feet from a wall. Turn on the headlights and mark the center of the beam on the wall with tape. Then, locate the adjustment screws on the back of the headlight assembly; one adjusts the vertical aim and the other adjusts the horizontal aim. Rotate the screws until the beam aligns with the taped marks.
How does a headlight aligner work?
uses a bubble level to aim the headlights.
How do you Aim headlights on a 2006 Buick century?
To aim the headlights on a 2006 Buick Century, park the vehicle on a level surface about 25 feet from a wall. Measure the height of the headlight center from the ground and mark this height on the wall. Turn on the headlights and adjust the vertical aim using the adjustment screws located on the headlight assembly until the top of the light beam is aligned with the mark on the wall. Ensure the headlights are aimed properly to avoid blinding other drivers while providing optimal visibility.
How do i Aim headlights 2004 Malibu?
Take it to the dealer and let them put there gauges on them to get them set right.
How do you adjust headlights on a Lincoln Navigator?
There are little black rods sticking up by the head lights that have a spot to put a screwdriver in. You turn these rods to aim the headlights correctly.
How do you aim headlights on a 1993 Mazda 626?
Park your vehicle approximately 15 feet from your garage door or another wall. Open the hood and on top of both of the headlights you will see adjustment screws. Rotating them will lower/raise the headlights
How do you aim headlights on 2002 Acura?
The are adjustment screws next to the headlight housings. To adjust the headlights either loosen or tight the screws. This will either raise or lower the headlight unit.
