it takes 2 people,1 to pump the clutch pedal and the other to bleed it from underneath at the clutch slave cyl. but remember to keep the reservoir full at all time. it is kind of like bleeding the brakes on your car
YES, There the same.
yes, 82-93 are the same besides grill design
which fuse is for the fuel pump in a 1993 chevy s10 blazer
There is no adjustment, The clutch it self is either worn out, Bad clutch slave cylinder. Air are no fluid in the clutch mastercylinder. Fill clutch master cylinder up with fluid, be sure to remove the little rubber cub that is inside of the clutch master cylinder before you fill it up, then bleed the clutch of all air. Then see if the clutch works better.
Take it to a garage that does alignments.
yes
Originally it would have had DexCool.
The 1993 Chevy S 10 Blazer IAT sensor can be found on the top of the transmission. The IAT sensor will be near the front of the transmission.
yes it will up to 93 as long as they are bothe 4wd or to wheel drive
might be a fuse
Under The left side of the steering column.
Yes, the last year for throttle body injection for Chevy was in 1995, I believe.