0
follow the line from the master cylinder for the clutch usually there is a bleeder screw on the fire wall a couple feet from cyclinder, get some one to pump the clutch as you would bleeding the brakes, then theres a nother bleeder screw b4 the line goes to the flexline by the trans
What else can I help you with?
What is the lug pattern for a 1993 Mazda b2200?
6x5.5"
Does a 1993 Mazda b2200 have a transmission fluid dipstick?
Automatic:yes. Manual:no.
Will a 1992 Mazda B2200 pick up truck body be compatible with a 1987 Mazda B2200 pick up truck engine?
The Mazda B2200 truck body did not change much, if at all between 1986 and 1993. There should be no differences in the shape of the engine compartment. -Kyrasis6 Owner of Mazdatruckin.com
How do you bleed the clutch for a 1993 infiniti g20?
1993 Infiniti G20 does not have a hydrolic clutch! It has a cable, that runs under the intake stuff.
How much horsepower does a 1993 Mazda B2200 have?
stock horsepower and torque was 85 HP and 115 LBS of torque
How do you detect a bad brake module on Mazda b2200?
i have a b2200 Mazda 1993 and everytime i brake a clicking noise come out of the passenger side like in the back of the seat at the same time the brake pedal moves down with each click what can that be.
Where was the 1990 Mazda b2200 truck built?
All the 1986-1993 mazda b series trucks were manufactured in japan.By the way great built trucks for that matter.
How do you bleed a clutch on a 1993 Honda Civic?
Pump the pedal to the floor and then screw on the cylinder.
Where is the thermostat on a 1993 Mazda b2300?
Mazda did make a 1993 b2300(it was a b2200 or b2600).However the answer is follow the upper radiator hose to the block near the valve cover.The upper radiator hose connects to the thermostat housing.Easy.
What year Mazda truck is the same as a 1992 B2200 for a passenger door swap?
All 1986-1993 models have the same doors.
How do you replace the clutch slave cylinder on a 1993 Mazda 626?
To replace the clutch slave cylinder on a 1993 Mazda 626, first, ensure the vehicle is safely raised and secured. Begin by disconnecting the battery, then remove the hydraulic line from the slave cylinder and unbolt it from the transmission. Install the new slave cylinder by reversing the removal process, ensuring all connections are secure, and then bleed the clutch system to remove air from the hydraulic lines before reconnecting the battery.
Will a Mazda 6 lug fit on a Chevy 6 lug?
it will fit the b2200, b2000,b2600. I think 1987 to 1993.
