You just have to pull back the trim in the trunk to access the fasteners for the taillight assembly. Once you remove the taillight assembly just replace the bulb.
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
If the brake lights stay on when the car is not running on most vehicles, including the 1994 Dodge Intrepid, there is probably a short somewhere in the wiring to the brake lights. The first place to investigate this problem would be the wires along the firewall that control the brake lights. Also, check the brake light switch above the brake pedal.
well you change it from the outside
DOT 3 or DOT 4
change the wheel cylinders or the brake lines
brake and abs light on , on 1994 Chevy Cavalier Z24
you cant you cant
See the answer for the 90 model. Should be the same
If you have to ask a question like that, then you should not get an answer from anyone. I've included an instructional video below that should help answer all of your questions. Hope this helps out.
Take hold of the brake light switch and pull backwards. The switch will come out in the same way that you would unplug anything. Plug the new switch in
how to change front brake pads on a 1994 lexus es300
special bit for light lens cover, t 10 or t 20 bit light bulb unscrew from socket replace observe ligh light place foot on brake , re screw use brick on brake pedel