0
What else can I help you with?
How do you reset the ecu on a 2001 Hyundai xg300?
how do i reset the computer on my hyundai xg300
How do you replace the PCV valve on a 2001 Hyundai XG300?
To replace the PCV valve on a 2001 Hyundai XG300, first, locate the valve, which is typically found on the valve cover. Disconnect the hose attached to the PCV valve, then twist and pull the valve out of its socket. Insert the new PCV valve into the socket, reconnect the hose, and ensure everything is secure before starting the engine to check for proper operation.
Hyundai XG300 2001 where is the heater blower resistor located.?
The heater blower in a 2001 Hyundai XG300 is located on the passenger side of the engine. The blower resistor will be located on the firewall.
How do you change the gas filter on a 2001 Hyundai XG300?
its located under car by rear driver side wheel
Where is the fuel pump located on a 2001 Hyundai xg300?
in the fuel tank
How do you program a remote for a 2001 Hyundai xg300?
You've seen this, right? http://mlittle.com/Hyundai/remote/
What does TCS mean on a 2001 Hyundai xg300?
TCS stands for Traction Control System.
Where is the fuel pump relay on a 2001 Hyundai xg300?
A fuel pump relay switch is an electric switch which activates the fuel pump when the engine is cranked and when the engine is running. The switch is located under the dashboard near the steering column on the 2001 Hyundai xg300.
Where is the fuel pump relay located on a 2001 Hyundai xg300?
A fuel pump relay switch is an electric switch which activates the fuel pump when the engine is cranked and when the engine is running. The switch is located under the dashboard near the steering column on the 2001 Hyundai xg300.
How do you replace the power steering pump on a 2001 Hyundai xg300?
go to the Hyudai dealer and pay large
Where is the starter and how do I change it on a 2001 Hyundai XG300?
The starter on a 2001 Hyundai XG300 is located on the lower side of the engine, near the transmission. To change it, first disconnect the negative battery cable, then remove any components obstructing access to the starter, such as the air intake duct. Unbolt the starter from its mount, disconnect the electrical connections, and replace it with the new starter. Finally, reassemble everything in reverse order and reconnect the battery.
Where is the valve located to drain the old antifreeze on a 2001 Hyundai XG300?
I'm pretty sure it's on the drivers side on the bottom of the radiator. You'll need to remove the plastic protector from the front, bottom of your car to see it.
