What engine size? 4.9 liter should be easy. Just be careful with the housing unit. When filling the fluid make sure you turn the steering wheel lock to lock.
you will need a power steering pulley puller other than that its gravy
How to change the power steering pump depends on which engine your car has.
I am guessing it does. I own a 1989 Shadow and it has power steering. 99.9% of vehicles made after 1985 have power steering...however some vehicles had it before that. My 76 Ford Truck has it...
The 1989 BMW 750 power steering reservoir is located on the back side of the engine. The power steering reservoir will be between the engine and the firewall.
Secure the power steering pump with the retaining bolts. Attach the power steering hose to the power steering pump. Put the belt on to the power steering pump. Fill the power steering system with fluid.
Left of the steering column, under the dashboard.
they don't have power steering
It is part of the power steering pump assembly.
remove old belt install new belt you're welcome
no gas no power
To change the power steering pump on a 1989 Ford Aerostar, first, disconnect the negative battery cable and relieve the power steering system pressure by turning the steering wheel from side to side. Remove the serpentine belt and then detach the pump by unbolting it from the bracket. Disconnect the fluid lines and electrical connector, if applicable, then install the new pump by reversing the steps, ensuring all connections are secure and the system is properly filled with power steering fluid. Finally, reattach the battery cable and check for leaks after starting the engine.
The power steering pump is located on the front of the engine. The uppermost pump connected to the serpentine belt.