0
On either headlamp assembly you can change the bulb (standard H8 Haologen bulb; around $12 - $15) with no tools.
Be sure the engine is off and they key is removed from the car. Open the hood. Behnind the headlamp assembly (directly behind the bullet lamp) there is a round, black cover about 3" in diameter. Unscrew the cover. Unclip the power cable that runs to the lamp socket and push it out of the way. Rotate the lamp socket about 1/8 turn (22.5 degrees) toward the engine. Pull the lamp socket straight out.
Put a new H8 Haologen lamp bulb in by placing it about 1/8 turn toward the engine and seat it in the lamp housing. Turn it in the housing so that the lamp socket is straight up. Clip the cable that you removed back onto the lamp socket, and replace the cover.
What else can I help you with?
Does the 2008 mercury sable have daytime running lights?
yes it does
How do you replace the daytime running lamp on a 2008 gmc acadia?
How to change the daytime running lamp on 2008 GMC Acadia
How do you disable daytime running lights on 2008 Sequoia?
To disable the daytime running lights on a 2008 Sequoia, turn the head light switch to the center position. It should show two headlights, one with an 'X' and a line between the two.
How do you change both daytime running lights on a 2008 VW jetta take it off?
Open the engine compartment hood. Take hold of the day time running lights connector. Push the connector in and turn at the same time. The light bulb will come out.
How do you change daytime running lights on a 2008 BMW X5?
To change the daytime running lights on a 2008 BMW X5, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; you may need to remove the cover or access panel on the back of the assembly. Carefully disconnect the power connector and twist the bulb socket counterclockwise to remove it. Replace the bulb with a new one, reassemble the components, and test the lights to ensure they work properly.
2008 Subaru Outback Disable Daytime Running Lights?
Your question needs to be in a complete sentence in order to be answered correctly on this site.
How do you turn off daytime running lights 2008 Chrysler 300 Lx?
Take it to the dodge dealer and have them reprogram the computer to shut them off.
When did the Chrysler Town and Country add daytime running lights?
The Chrysler Town and Country added daytime running lights (DRLs) as a standard feature starting with the 2008 model year. This feature aimed to enhance visibility and safety by keeping the vehicle's lights on during daylight hours. Prior to this, DRLs were not universally included in earlier models.
How do I activate daytime running lights on a 2008 Sienna CE?
To activate the daytime running lights (DRL) on a 2008 Toyota Sienna CE, start by ensuring that the headlights are turned off. The DRL should automatically activate when the engine is running and the vehicle is in gear, provided that the light switch is in the "off" or "auto" position. If the lights do not activate, check the vehicle's manual for any specific settings or fuses related to the DRL system. If issues persist, consult a professional mechanic for assistance.
How do you enable day time running lights in a 2008 jeep grand Cherokee overland from the US that was imported to Canada?
Im pretty sure that you half to purchase a daytime running light module from the dealorship.
How do you turn off the day time running lights on a 2008 Jeep Patriot?
vehicles equipped with day time running lights are designed to have the running lights on when the vehicle is running in gear.the only time you can change that is by turning on the headlights, or turning off the ignition. some running lights go out when the transmission is put into park. ( the only way to change that is by manually disabling the lights, like cutting wires, or breaking bulbs)
How do you turn off daytime running lights on 2008 Suzuki Forenza?
To turn off the daytime running lights on a 2008 Suzuki Forenza, locate the headlight switch on the steering column or dashboard. Turn the switch to the "off" position, or if you have a manual control, set it to the 'auto' setting. If these steps do not work, consult the owner's manual for specific instructions or consider a visit to a dealership, as some models may require adjustments to the vehicle's lighting system.
