how do you change a battery on a 2002 Pontiac Montana
where is the freeze plug located in a 2000 pontiac montana mini van
go to a mechanic
Yes!
one issue could be that you need to change your thermostat
how to change the master cylinder without taking it to a shop
The G5 doesn’t come from the factory with grease fittings but that doesn’t mean that yours doesn’t, a lot of people will change there old worn bushings with new bushings that have grease fittings!
To change the bushings on the front upper control arms of a 1999 Dodge Ram 3500 van, first, safely lift and support the vehicle, then remove the front wheels. Disconnect the upper control arm by unbolting it from the frame and the ball joint. Use a bushing removal tool or a press to extract the old bushings, then install the new bushings in the control arm. Reassemble by bolting the control arm back in place, ensuring all components are properly torqued to specifications.
Jack up vehicle and change the rear plugs from underneath!
Before changing the radiator on a 2001 Pontiac Montana the coolant must first be drained. After the drain remove the radiator mounts, fans, and hoses. Pull the radiator upwards.
You can change the front turn signal, on your 2006 Pontiac Montana, by removing the retaining nuts. Remove the wiring harness. The turn signal will come free. Reverse the process to install the new turn signal.
The rear plugs have to be done from below. I took mine to the dealer and it was $150 to change the 3 plugs.