0
1) Disconnect the wire harness from the ignition coils
2) use a 10mm socket to take off the bolts on the ignition coils
3) pull the plug boots out in pairs ( so you don't have to disconnect the wires)
4) remove spark plugs with standard spark plug tool(comes with most socket-sets)
5) gap new plugs to .04 with spark plug gapper
6) install new spark plugs (make sure they're tight, but you don't need to kill it)
7) put the plugs boots back (the wires 'click' on the plug, the coil boots don't 'click')
8) put the ignition coil bolts back in
9) reconnect the wire harnesses to the ignition coils
10) enjoy your sweet car!!
**NGK plugs are your best bet
**if you have any check engine lights, disconnect the battery for 5 minutes to reset the codes
What else can I help you with?
How many spark plugs is on a 2008 Mitsubishi Lancer?
The 2008 Lancer uses a 4 cylinder engine, therefore it uses 4 spark plugs.
How do you change spark plugs on a 2000 Mitsubishi Lancer?
To change the spark plugs on a 2000 Mitsubishi Lancer, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil or spark plug wires to access the spark plugs, then use a spark plug socket and ratchet to unscrew and remove the old plugs. Check the gap on the new spark plugs, install them carefully, and torque them to the manufacturer's specifications. Finally, reconnect the ignition components and the battery terminal.
How do you change spark-plugs in 2005 Mitsubishi lancer?
To change the spark plugs in a 2005 Mitsubishi Lancer, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil or spark plug wires by gently pulling them off the spark plugs. Use a ratchet and spark plug socket to carefully unscrew the old spark plugs, then install the new ones by hand to avoid cross-threading. Finally, reconnect the ignition coils or wires and the battery terminal.
How many spark plugs on Mitsubishi Lancer?
Four.
When do you change your spark plugs?
when do you change spark plugs
Where are the spark plugs on a 2005 Mitsubishi lancer es?
On a 2005 Mitsubishi Lancer ES, the spark plugs are located on the engine cylinder head, beneath the ignition coils. To access them, you'll need to remove the engine cover and then detach the ignition coils from each spark plug. Once the coils are removed, you can unscrew the spark plugs using a spark plug socket.
What is the spark plug gap on a 2002 Mitsubishi Lancer?
02 lancer gaplook under the hood of your lancer for the specs, but the gap is .039-.042. With platinum plugs, a spark plug gap isn't necessary.
Where are the spark plugs located on a 2004 Mitsubishi oz rally?
On the engine head !
How do you change the spark plugs in a 1995 GMC Safari van?
To change the spark plugs in a 1997 astro van do I have to change the spark plugs from the bottom of the engine/
Where is position of spark plugs for envoy 2005?
How to change the spark plugs
How do you change spark plugs on 2001 ford expedition?
how to change spark plugs on a 2001 expedition
Spark plug gap 05 lancer es?
I have an 03 lancer es and in the owners manual it says 1.0-1.1 is the gap for the plugs
