0
You have to remove the drivers seat, fold back the carpet and you'll expose an engine cover...
Undo all the bolts and lift the cover off and you'll see the top of the engine...
Remove (Black) cover over the rocker cover to expose the leads, remove the high tension leads and then remove the plugs. You WILL need an extension bar with your spark plug socket as they are fairly deep into the rocker cover
It can also be done by simply driving it up on ramps & removing plugs from under the drivers side of car.
What else can I help you with?
How do you change spark plugs in a 1996 Toyota Corolla DX?
There is an article with video on how to change spark plugs at ; http://www.carbasics.co.uk Look in their 'how to' section.
How can you get a Peugeot 205 automatic 1996 started when there is no spark?
Change the Spark plugs, if not bin it
How do you change spark plugs in 1996 Honda Accord?
remove the spark plug wires one at a time and unscrew the plugs
How do you change spark plugs on 1996 Buick Century?
Remove the spark plugs wire and remove the plugs wit a spaerk plug wrench or socket.
How do you change spark plugs on 1996 Cadillac deville 4.6 liter?
Spark plugs are easy to change. One disconnects the batter and spark plug cables, and removes the old spark plugs. Next a person puts in the new spark plugs, then reconnects spark plug cables and the battery.
Where are the spark plugs on a 1996 Nissan Maxima?
Where are the spark plugs on a 1996 Nissan maxima?"
How often do you need to change spark plugs on a 1996 jag?
platinum plugs 75,000 miles. resistor plugs 30,000.
How do you install Spark Plugs and wires on a 1994 Cadillac Deville Concours?
How can I change the wiring and spark plugs on my 1996 Cadillac Sedan Deville Concours?
How do you change spark plugs on a 1996 Mercury Villager Van?
With a spark plug socket and socket wrenches and extensions.
How do you change spark plugs on a 1996 Oldsmobile Aurora?
To change the spark plugs on a 1996 Oldsmobile Aurora, first, disconnect the battery to ensure safety. Remove the engine cover if necessary, then locate the spark plugs, which are typically beneath the ignition coils. Unscrew the ignition coils, carefully pull them out, and then use a spark plug socket to remove the old spark plugs. Install the new spark plugs, ensuring they are properly gapped, reattach the ignition coils, and reconnect the battery.
How do you change the spark plugs on a 1996 Toyota Camry?
Disconnect the battery, remove the spark plug cables and boots, and remove the old spark plugs. Next, put in the new spark plugs, replace the cables and boots, and reconnect the battery.
How do you change the spark plugs on a 1996 Volkswagen?
To change the spark plugs on a 1996 Volkswagen, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil or spark plug wires to access the plugs, then use a spark plug socket and ratchet to unscrew the old plugs. Check the gap on the new spark plugs and install them by hand to avoid cross-threading, then tighten them with the ratchet. Finally, reconnect the ignition components and the battery terminal.
