0
Assuming you have the proper replacement plugs, a deep socket wrench and the round spark plug gap gauge you are ready. Remove one spark plug wire by gently rotating the cap on the spark plug to break the seal and remove it carefully. Check the gap on the new plug and adjust if not properly preset. The owner's manual has the gap listed as well as the autoparts store. Loosen the plug and replace one by one putting the wire back and pressing it into place until you feel a little snap. Be careful not to get the socket wrench off center as you tighten or you can crack the ceramic of the plug. Follow the directions in the box as to how tight. Look at the web site of the plug manufacturer for more info.
What else can I help you with?
When do you change spark plugs in a suburban?
100,000 miles according to the factoryspec.
How do you change spark plugs on a 2007 Chevy Suburban?
take it to the dealer
Do you have to change the spark plugs when you change the O2 sensor on a 1995 5.7L Suburban?
No, the spark plugs and O2 sensor are totally different things. that is not right!! they are the same things!!
When do you change your spark plugs?
when do you change spark plugs
How many spark plugs on a 1994 Chevy Suburban?
Most came with a V-8 engine, which took 8 spark plugs.
How do you change the spark plugs in a 1995 GMC Safari van?
To change the spark plugs in a 1997 astro van do I have to change the spark plugs from the bottom of the engine/
Where is position of spark plugs for envoy 2005?
How to change the spark plugs
How do you change spark plugs on 2001 ford expedition?
how to change spark plugs on a 2001 expedition
How many spark plugs on a Chevy Suburban 2001?
The V-8 engine has 8 plugs and the V-6 has 6 plugs.
How many spark plugs does a 2003 Chevrolet Suburban z71 take?
10
How do you change spark plugs for a 2003 Mitsubishi galant spark plugs?
2002 galant , can't find the spark plugs
What is the spark plug gap for a 2004 suburban?
The spark plug gap for a 2004 Chevrolet Suburban should be set at .040 inches. The new spark plugs are pre-gapped and do not need adjusting.
