0
When you open the tail gate there are two tabs in the tail gate channel to the left of the tail light assembly. Prize these tabs out with a small flat blade screwdriver to get access to the Phillips Head screws underneath. Remove these screws and slide the tail light assembly towards the rear. This will give you access to the stop/tail light bulb. Replace the faulty bulb with the correct double filament 12 volt 21/5 watt bulb. Reassemble by reversing the steps above and click the tabs back into place. While you have the tools out, it is a good idea to replace the bulbs on both sides of the car as the other bulb has had identical use and may not last much longer anyway.
What else can I help you with?
Where is the tail light fuse panel for subaru impreza wrx located?
The tail light fuse panel for the Subaru Impreza WRX located in the fuse box.
How do you change tail light on 2006 Subaru Outback?
See "Rear Combination Lights" on page 51 in chapter 11 "Maintenance and Service" of your "OWNER'S MANUAL".....
How do you change tail light in Toyota sequoia?
How do you change the tail light on a 2001 toyota sequoia
How do you change a tail light on a 2006 sequoia?
how to change tail light bulb on Toyota sequoia
How do you change the brake light on a 2006 Subaru Forester?
To change the brake light on a 2006 Subaru Forester, first, open the rear hatch and locate the tail light assembly. Remove the two screws securing the tail light, then gently pull the assembly out. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble by reversing the steps. Make sure to test the new bulb before securing everything back in place.
How do you get to the rear tail light to change it on a 94' crown Victoria?
on the tail light problem - unbolt the tail light from inside th truck -the hold tail light assemble will come out - it is recommended to change all the blubs your all ready there
How do you replace brake light Subaru Outback 2008?
To replace the brake light on a 2008 Subaru Outback, first, open the trunk and locate the tail light assembly. Remove the screws or clips securing the tail light and carefully pull it out. Disconnect the electrical connector, then twist and remove the old bulb from the socket. Insert the new bulb, reconnect the electrical connector, and reassemble the tail light by securing it back in place.
How do you change the right rear tail light in a 1994 Subaru Legacy?
un bolt it from the back side and take the plugs out, might have to take the carpet or plastic pieces in trunk out to access it, ive never done it on a subaru but i have on every other kind of car
How do you change tail light on 2002?
2002 what?
Change hhr tail light bulb?
What is the part number for the 2008 HHR tail light bulbs and backup light bulbs?
Is it necessary to remove the tail light assembly to change the tail light bulb on a Mazda MPV?
Yes unfortunatly
How do you change a tail light on 2003 impala?
dont
