0
Remove the passenger front wheel. You will have to take off 3 bolts that hold the passenger axle to the sub frame, slide the axel out. Remove the two bolts that mount the alternator and get the belt loose. Now wrestle with that sucker until you can fit it between the axel and the exhaust, its a real pain.
What else can I help you with?
Mazda lx 626 2000 how do i change transmission filter?
Mazda lx 626 2000 how do i chage transmission filter
Where is the alternator located on a 1999 Mazda 626 LX-v6?
The 1999 Mazda 626 alternator is located on the right hand side of the engine. The alternator will be near the front of the engine.
How do I get a Replacement key for Mazda 1998 626?
How do I get a replacement key for 2000 mazda 626?
Where is the Voltage regulator in a 1996 Mazda 626?
It is built into the alternator...
How do you change alternator belt on a 1998 Mazda 626?
To change the alternator belt on a 1998 Mazda 626 you need to first loosen the bolt that is located in the center of the adjustment pulley. Next, turn the adjustment bolt to the left until the belt is loose and can be removed. Reverse the steps to replace with the new belt.
Does a 2000 Mazda 626 have a timing belt or chain?
A 2000 Mazda 626 (4 cyl and V6 engines) has a timing belt.
How do you change alternator belt on a 1988 Mazda 626?
To change the alternator belt on a 1988 Mazda 626, first, disconnect the negative battery cable for safety. Locate the alternator, then loosen the tensioner bolt and the mounting bolts on the alternator to relieve tension on the belt. Remove the old belt and install the new one, ensuring it sits properly on the pulleys. Finally, retighten the alternator bolts, adjust the tension as needed, and reconnect the battery cable.
Does a 2000 Mazda 626 have a rotary engine?
No.
Does the 1994 Mazda 626 have a anti-theft alarm?
How do i change my 1994 mazda 626 alternater
Timing belt break 2000 Mazda 626 lx?
You are extremely fortunate. The 4 cylinder & V6 on the 2000 Mazda 626 are NOT interference engines. There should be no damage.You are extremely fortunate. The 4 cylinder & V6 on the 2000 Mazda 626 are NOT interference engines. There should be no damage.
How do you remove the alternator on a Mazda 626 1989?
Remove passenger side Rack and pinion arm and slide out Alternator .
When to change timing belt on 2000 Mazda 626?
The timing belt on a 2002 Mazda 626 should be changed every 100,000 miles. By replacing it before it completely fails, costs repairs can be avoided.
