You get under the running boards right under the lights. there is a little plastic housing. pull this housing down and change light bulb is that easy.
If you go to the parts store they will tell you, and since your there you can also buy them.
They probably aren't grounded.
I hope your referring to the light bulbs. If so, I think they are the #194 mini bulbs. Your Local Parts Store will be able to verify this info.
I think they are the #194 mini bulbs. Your Local Parts Store will be able to verify this info.
change out the bulbs......
There is a plastic pen that looks like a screw that must be pulled out beside the light. Then the entire assy. hinges down
You have to take the whole front console off including all the plastic moldings, and finally get to the dash board. You can find the lights bulbs behind it. It took me 3+ hours to get this done. good luck.
The bulbs are actually soldered into the circuit board. The only way to change them is to dismantle the whole cluster and desolder then re-solder the bulbs.
To change the odometer bulbs in a Ford Expedition, first, disconnect the vehicle's battery to ensure safety. Remove the dashboard panel by unscrewing any screws and gently prying it away to access the instrument cluster. Next, unscrew the cluster from its housing, then locate and replace the faulty odometer bulbs with new ones. Reassemble the dashboard and reconnect the battery, ensuring everything is securely in place before testing the new bulbs.
Remove the headlight assembly to gain access to the bulbs.
I just did this to my radio. You must remove the radio for the dash. Open the radio to reveal the circuit board and solder new bulbs on the board. I found the bulbs at Radio shack online.
If the blubs and fuses are good try looking at the wires going to the boards ck. the plugs under the truck the wire for the right side is at the back wheel and wire for the left side is at the front wheel