0
Remove front wheels, remove the two 14mm bolts securing the caliper to the mount. Lift the caliper off and hang from wire or zip tie. Remove the old pads and if needed, remove the metal hardware. Replace the new hardware and new pads. You will need to use one of the old pads to press the caliper piston into the caliper. I use a large set of Channel Locks to do this. Once the piston is in the caliper you will be able to insert the caliper onto the mount and re-install the 14mm bolts. Once you have this done on both sides you will need to pump the brakes a couple of time to make sure the pads are seated. Install the wheels and you are done.
What else can I help you with?
How do you change the brake pads on a 1999 ford ranger?
depends on which break pads.
How do you change 1999 ford explorer front brake rotors?
remove the brake caliper and the rotors come right off
1999 ford ranger the brake drums get hot why?
Friction.
How to change front rotors on a 1999 windstar?
You remove the wheels, remove the brake caliper and the rotor is then free .
How do you turn brake drums on a 1999 Ranger?
Remove the drums and take them to an auto parts store that has a brake drum lathe.
Where is the 1999 Ford ranger clutch master cylinder located?
under the brake booster
Is there a brake switch on a 1999 Ford Ranger XLT?
If you mean (brake light) switch, the answer is yes. It is located at the top part of the brake pedal assembley.
How do you change the front brakes and the back brakes on a 1999 Alero Oldsmobile?
First of all, Do you have any specialty brake tools? Ben
What is in front of a radiator on a 1999 ford ranger?
The air conditioning condensor
Change a front signal on a 1999 Corvette?
how do u change front signal lights for corvette 1999
What size rear brake shoes does a 1999 Ford Ranger have?
You could have either 9 inch or 10 inch , depending on the brake drum size
How do you change front breaks o A 1999 Cadillac sts?
To change the front brakes on a 1999 Cadillac STS, start by safely lifting the vehicle and removing the front wheels. Next, remove the caliper bolts and slide the caliper off the brake rotor, then remove the old brake pads. Install the new pads, ensuring they are properly seated, and reattach the caliper. Finally, replace the wheel, lower the vehicle, and pump the brake pedal to ensure the pads seat correctly before driving.
