You'll need a 3/8" hex drive (allan key) and a C-Clamp (something that can compress the brake piston)
After you jack the front wheel and remove it, use the 3/8" hex drive to remove the brake caliper from the brake rotor. The bolt/screw that you need to get access to for you to do this is located on the inboard side of the brake caliper. Turn it all the way out and you'll notice that the brake caliper is now a little bit loose and can be pry'd off the brake rotor.
Remove the brake rotor from the axle and install the new clean one. (Wipe the oil or grease away from the rotor)
Pry the Pads off of the caliper with a screwdriver or something like that.
Use a "C"-clamp and push the brake piston all the way back to the retracted posistion.
Install the new brake pads and then install the brake caliper on the rotor.
Tighten the 3/8" Hex drive bolt/screw
Install your wheel and start your vehicle and pump your brakes a few times as it will feel "Spongy" for a few pumps. The brake pedal will become more responsive.
Wouldn't hurt to check your brake fluid level. Use appropiate fluid.
what tools do i use to change the front brakes in my 2003 Pontiac grand prix
If you go to advance auto, or auto zone and purchase a haynes manual for 10 to 20 dollars, it will describe in detail (including pictures) of this repair, and many more for this automobile.
Yes , a 1995 Pontiac Sunfire is a front wheel drive vehicle
If you go to advance auto, or auto zone and purchase a haynes manual for 10 to 20 dollars, it will describe in detail (including pictures) of this repair, and many more for this automobile.
Visegrips, a cigarette and beer.
You need a 3/8" allan key or hex socket - not a torx
sorry i cant answer that ? but just curious I have a 2003 Pontiac grand am se and the front brakes have to be replaced about every 7 months, are you haviing any problem like that with your car?
you would have to change the bumper and fenders on your sunfire to get the hood to fit but to start off u would have to change the front bumper clip to interchange bumpers
4x6
yes
I have a 99 grand am and I am tring to replace the brakes on the front of my car but when I go to put the brakes back on the caliper wont line up wheats wrong with this? How do I fix this?
Try Front Left.