answersLogoWhite

0

Hi,on my 307 it's a plastic housing & bloody hard to undo-impossible by hand,but I used an oil filter wrench (with care!!) & it worked fine.Hope this helps.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What is the recommended mileage for changing a cambelt on a Peugeot 106?

According to Peugeot it is 72,000 miles, but the Haynes manual suggests changing it at 36,000 miles.


Can you get a wiring diagram for an n reg peugeot 205 d?

yes you need to buy a haynes manual


Where are the timing marks on a peugeot 406 hdi 2.0?

The timing marks on a Peugeot 406 HDI 2.0 is on the front of the crank pulley. You can get a diagram by purchasing a Haynes Repair Manual.


What is the drive shaft wheel nut torque setting on a peugeot 106 1.1 1998?

245 lbs in haynes


How much power steering fluid does a peugeot 306 tdi take?

Haynes manual states 1.7 litres


How do you change lower swivel ball-joint on a peugeot 306?

Best idea is to buy a Haynes Manual. It goes through the whole thing...


Where could you find a Step by step guide to change brake shoes on a peugeot 206 petrol 1.4 2002?

In a Haynes workshop manual.


How do you put a headlight housing into a 2002 Ford Ranger?

Per Haynes Ford Ranger Pickups Repair Manual: Steps for removal are: (1)open the hood; (2)unscrew the retainer from the back of the headlight; (3)pull the bulb socket out of the headlight assembly; (4)pull out the housing clips and remove the housing from the grille opening;(5)NOTE: on later models, there are only two clips that are pulled up to release the headlight housing. They are located on the back of the housing - one on each side. After pulling them up, simply move the headlight housing forward from the vehicle. (6)the steps for installing it back are the reverse of the removal steps.


How do you replace front right head light for mazada 1996 b2300?

(1) Open the hood; (2)unscrew the retainer from the back of the headlight; (3)pull the bulb socket out of the headlight assembly; (4)pull out the housing clips and remove the housing from the grill. NOTE:on later models there only 2 clips that are pulled up to release the headlight housing - one on each side. After pulling them up, simply move the headlamp housing forward from the vehicle. It may also be necessary to remove the headlight housing to change the bulb. - Haynes Repair Manual #36071; 1994-2005 Mazda Pickups.


How do you replace the head lamp bulb on a 1994 Ford Ranger?

(1) Open the hood; (2)unscrew the retainer from the back of the headlight; (3)pull the bulb socket out of the headlight assembly; (4)pull out the housing clips and remove the housing from the grill. NOTE:on later models there only 2 clips that are pulled up to release the headlight housing - one on each side. After pulling them up, simply move the headlamp housing forward from the vehicle. It may also be necessary to remove the headlight housing to change the bulb. - Haynes Repair Manual #36071; 1993-2005 Ford Ranger Pickups.


How do you change the clutch on a 1994 Peugeot 106 XND?

This is a BIG job. I sugest taking it to a garage inless you have a lift and special tools. Clutch change is graded three spanners by Haynes difficult but not impossible - since you ask the question here I guess that means you don't even have a Haynes manual so probably are best taking it to a garage. Peugeot estimate 4 hours for gearbox removal and refitting - make that 8-12 for the average DIY mechanic doing it for the first(hopefully only) time. Try a clutch clinic. Given the age of the car is it worth it?


How do you fix your brakes on a Peugeot 205?

i could go through it for you but you could go and buy a haynes manual that will tell and show you exactly how to overall your brakes