You have to remove three screws on the top side of the grill. Pull the grill up to take off. This will give you access to two Phillips screws, one on each side of the passenger and driver side headlamp. Remove the one screw on each lamp, "that's it". Pull lamp assembly towards you (Do not force! YOU WILL BREAK THE TABS). When the assembly is out disconnect the plug and you will have access to the back side of the assembly lamp. You will see large circular covers, they twist off to gain access to the bulbs. It's straight forward from there. Oh ya... Do not touch the glass on a new halogen bulb. The oil from your fingers will cause the bulb to fail prematurely. oils on your skin will create a film on the glass of the bulb. the film will cause the glass to heat unevenly and burst. FYI...
Alex
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?
No, the 2000 takes a 9003 bulb and the 2004 takes a 755 bulb. See sources and related links below.
Remove the grill and the headlights will sort of hinge out so you can pop cover off back.
How do you change a headlight bulb on 1 2004 Hyundai XG 350?
what is the bulb Walt for my 2004 ford ranger xlt 4.0
Suggest dealership do it. On an m6 you'll have to drop the bumper deending on which headlight you need to change.
How do you replace headlight bulb on 2004 Mazda Tribute?
To change the headlight bulb on a 2004 Nissan 350Z, first, open the hood and locate the back of the headlight assembly. Disconnect the wiring harness by gently pulling it away from the bulb. Twist the old bulb counterclockwise to remove it, then insert the new bulb by aligning it and twisting it clockwise to secure. Finally, reconnect the wiring harness and test the headlight to ensure it’s working properly.
To change the right headlight bulb on a 2004 Ford Ranger, first, open the hood and locate the headlight assembly. Disconnect the electrical connector by pulling it away from the bulb. Next, twist the bulb socket counterclockwise to remove the old bulb, then insert the new bulb into the socket and twist it clockwise to secure it. Finally, reconnect the electrical connector and close the hood.
In a lot of newer cars, you pop the hood and twist off the bulb-holder from behind the headlight. Then, you remove the old bulb, insert the new bulb, and twist the bulb-holder back into the headlight. In some cars, you have to replace the whole headlight.
To change the low beam bulb on a 2004 Mercedes E320, first, open the hood and locate the headlight assembly. Remove the plastic cover or access panel on the back of the headlight to expose the bulb. Disconnect the electrical connector from the bulb, then twist the bulb socket counterclockwise to remove it. Replace the old bulb with a new one, ensuring not to touch the glass with your fingers, and reassemble the headlight by reversing the steps.
Bust the blowed one and stick the new one in