By taking it to an expert or buying a repair manual with detailed instructions & photos. If this is an interference engine and you do it wrong, serious engine damage will occur when you attempt to start the engine. Make sure it is done correctly! only the 16valve engines have the interference issue- the earlier, 8 valve engines are not an interference fit (generally 1993 and earlier).
what is the timing specs for a 95 geo tracker
1994 Geo Prizm has a timing belt.
timing belts are usually changed every 100,000 miles and you should be go to go
nothing
see my profile see link. click , maintenance then ignition timing. behold
To change the fan belt on a 2003 Geo Tracker, first, disconnect the negative battery terminal for safety. Then, locate the belt tensioner and use a wrench to relieve tension on the belt. Remove the old belt from the pulleys and install the new belt, ensuring it follows the correct routing. Finally, release the tensioner to tighten the belt and reconnect the battery terminal.
http://www.kick-fix.com/t-belt/tbelt.html
How do you replace the timing belt on a 1994 Geo Prizm 1.6?
When you replace the timing belt you should replace the water pump and tensioner pulley as well. It may save you in labor costs down the road. But, all together it is about $500.
The 1996 Geo Tracker 1.6 liter engine timing marks can be found on the outside of the main pulley. The timing marks will be scattered around the pulley.
Replace every 60,000 miles.
8 degrees BTDC