Right above the clutch is a white button push it with the key on and the light will "blink" out the code. My problem is I cant find out what my code means.
You need the have the abs codes checked. You can then diagnose and repair the cause.
If the abs and check engine lights are on there is a problem. Both computers should have codes stored in there memories. Have the codes read. You can then diagnose the cause.
You need to have the engine and abs checked for codes.
Hook up a NexIQ box to it.
Usually it means there is a problem with the anti-lock braking system, take it to a mechanic and have them check the abs codes as well as the engine codes just in case there is a code in the computer relating to the abs system.
You can get ABS codes for your Volvo at your local Volvo dealership. You can also find the ABS codes in most Volvo service manuals.
Anything from a bad wheel speed sensor up to a complete failure of the ABS system.
abs codes are retreved by juming obd2 terminal 4-12 after codes plump brake petal 6 times
Have the abs system checked for codes and repair the cause.Have the abs system checked for codes and repair the cause.
possible abs or vvs speed sensor you need to check codes and go from there
To reset the abs light you need to check the system for failure codes, repair the cause, and reset with a scan tool.
Turn the key off, then off. The ABS codes are nor cleared and the light off unless a problem has been detected again. If the problem is detected again, check for ABS codes. Not that most common problems are bad speed sensor or bad control module.