Take a DC volt meter and check the voltage at the battery. Red probe on positive + terminal and Black probe on negative - terminal. If it reads 12.6 volts it is fully charged. 12.4 and it is 75%, 12.2 and it is 50%, 12.0 and it is 25% charged. Less than 12 volts and it is considered a dead battery.
Check the battery and see if it is charged or needs to be changed. Check the battery cables Check the starter condition
Check your power . Battery and see if it is charged.
This could be the voltage regulator. Both the positive from the battery and the starter would be connected to it.
Yes, the battery is fully charged.
A battery float charger is intended only to keep a fully charged battery from losing its charge. It will NOT work to charge a battery that is discharged or damaged. Check the voltage of the battery to be charged. Do not use charger if the battery voltage is less than 9.6 volts.
Something is draining the battery. Check all lights. Glove box, trunk, etc. Also check the power window switch.
Check the starter.
First, check if you battery if properly charged, and 95% of the time that is the reason.
If the amp meter reads 0 when the battery charger is plugged in, it likely indicates that the battery is fully charged or that there is a problem with the charger or the battery itself. A fully charged battery should not draw any current from the charger. However, if the battery is not fully charged and still shows 0 amps, it could suggest an issue with the charger or a faulty connection. It's advisable to check the connections and test the charger with a different battery.
The battery is most likely being over-charged. Check the alternator diodes or the voltage regulator.
Low/bad battery, bad battery connection. If the battery isn't getting fully charged you might not be able to start. If it isn't getting charged, check the alternator.
No, a battery's weight does not increase when it is charged.