To check the fuel gauge on a 1957 Oldsmobile, first ensure the ignition is on without starting the engine. Then, observe the fuel gauge on the dashboard; it should point to the appropriate level based on the amount of fuel in the tank. If the gauge doesn’t move or shows an incorrect reading, inspect the wiring and connections from the gauge to the sending unit in the fuel tank. Additionally, you may want to check the sending unit itself for any faults.
Need to check fuel pressure with a gauge first. Then check fuel pressure regulator. Need to check fuel pressure with a gauge first. Then check fuel pressure regulator. Need to check fuel pressure with a gauge first. Then check fuel pressure regulator. Need to check fuel pressure with a gauge first. Then check fuel pressure regulator.
The fuel pressure of a 1999 Oldsmobile 3.8 liter V6 is 35 psi. A fuel pressure gauge is needed to measure the fuel pressure.
Most likely either a bad float in the fuel tank or defective gauge
most fuel gauge problems are due to a bad fuel sender unit which is mounted inside the fuel tank. have wires and gauge tested for signal before dropping fuel tank
I use a fuel pressure gauge.
It's attached to the fuel pump sending unit, inside the fuel tank.
check fuel sending unit and float. Also check fuel gauge itself.
Most fuel gauge problems are the result of a faulty fuel gauge sending unit located in the fuel tank.
Your fuel is low. Its telling you to check your gas gauge...
check your answer
Check
with a fuel pressure gauge