A Suzuki Hayabusa typically requires about 3.5 to 4.0 liters (approximately 3.7 to 4.2 quarts) of coolant when completely filled. It's important to use the recommended type of coolant, which is usually a mixture of water and antifreeze. Always check the owner's manual for the specific model year for precise specifications and guidelines regarding coolant levels.
if coolant is ok!! then check coolant sensor.
186mph
To change the antifreeze in a Suzuki Hayabusa, start by ensuring the engine is cool and then locate the coolant drain bolt at the bottom of the radiator. Remove the drain bolt and let the old coolant flow out into a suitable container. After draining, close the bolt and fill the radiator with a new coolant mixture, ensuring to use the recommended type for your model. Finally, run the engine briefly to circulate the new coolant and check for any leaks before sealing everything up.
The 1999 Hayabusa stock out of the box 189 mph +/-. After that year the bikes were governed.
hope not as it would look ridiculous.
The fastest production model of the Suzuki Hayabusa was the 2022 Suzuki Hayabusa, which has a top speed of around 186 mph (299 km/h) due to its electronically limited speed. The unrestricted top speed of the Hayabusa is over 200 mph (322 km/h).
Check to make sure cooling fan comes on with A/C Check coolant level
check the coolant in the radiator it may be low.
To add engine coolant to a 1999 Oldsmobile 88, first ensure the engine is cool and locate the coolant reservoir, typically marked with a cap labeled "coolant." Open the cap and check the coolant level; if it's low, add a 50/50 mix of antifreeze and distilled water until it reaches the appropriate level. Replace the cap securely, and check for any leaks or signs of coolant loss. Always consult the owner’s manual for specific recommendations regarding coolant type and capacity.
This is typical of an engine being low on coolant in the radiator, check your radiators coolant level and fill it.
where is coolant tempreture senser in 1999 corolla