answersLogoWhite

0

First, gauge connect with pressure line and return line. then turn on engine. you will see the rate of flow and pressure on gauge.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Where do you put power steering fluid on a 1991 Ford ranger?

At the power steering pump. Remove the cap on the pump and check the level.At the power steering pump. Remove the cap on the pump and check the level.


What is the output of a Power steering pump?

The output of a power steering pump is the high pressure side which goes to the steering box. It creates hydraulic pressure which makes steering much easier.


Why do have i no power steering or power brakes in dodge ram 2001 diesel the power steering locked up then they where both gone and i hit the ditch?

The power steering pump provides the pressure for the steering and brakes. Check the p.s. fluid.


Your power steering pump is leaking and you replaced the pump what do you do its a 2001 Pontiac sunfire?

Have you checked the power steering pressure line?


Your steering went out on your Toyota t 100 what could it be?

Check power steering belt, check power steering pump, check rack for leaks


Why do i have No power steering on a Pontiac Bonneville?

This is two of the things I know that could be wrong. The power steering pump is either bad or there is no power steering fluid in the pump causing it to have steering problems. Be sure to check the fluid level in the power steering pump.


Where is the power steering pressure switch located on a 97 Toyota Camry le v6?

Power steering power steering pressure switch is a part of power steering pump. There is wire harness connect to the pump, it's connect the switch. Find the harness you will find the switch.


How do you Replace power steering pump Chevy pu 350 motor?

To replace the power steering pump on a Chevy pickup with a 350 motor, first, disconnect the battery and relieve the pressure in the power steering system by turning the steering wheel. Then, remove the drive belt and disconnect the power steering lines from the pump. Unbolt the pump from its mounting bracket and replace it with the new pump, reattaching the lines, and then reinstall the drive belt. Finally, refill the power steering fluid and check for leaks before reconnecting the battery and testing the system.


Diagrame of power steering system?

Power steering systems can be diagrammed into two chief components. These are the power steering pump and the rack-and-pinion steering gear. The power steering pump sends pressurized fluid into the rack which moves the gear actuating the tie-rods, which moves the wheels in the desired direction. The power steering pump has a low pressure return line and high pressure out one.


Where is the power steering fluid check on a 2002 grand prix?

in the power steering pump silly...


Where is the power steering pressure sensor switch located on a 99 avenger?

The power steering pressure sensor is located on the front of the power steering pump. It is circular and has one wire going to it.


Where is the power steering pressure switch for a 1993 chrysler new yorker?

The power steering pressure switch, on a 1993 Chrysler New Yorker, is located below the power steering pump. The pressure switch is attached to the power steering reservoir mounting bracket.