To check if a temperature sensor is working, first, ensure it is properly connected to the power supply and any data acquisition system. Use a calibrated thermometer to compare the temperature reading from the sensor with the thermometer's reading in a controlled environment. You can also perform a continuity test with a multimeter to check for any faults in the sensor's wiring. If the readings are significantly off or if there is no response, the sensor may need to be replaced.
Check to make sure that the temperature sensor is good. A bad sensor is commonly the cause of the temperature gauge not working.
how do you check the abs sensor on a 1998 contour
When my check engine light comes on, it is caused by the temperature sensor not working. As soon as the light comes on, my temperature drops to cool. If the light goes out, the temp gauge returns to normal.
OHM meter
check the power to gauge and the temperature sensor (tps). if no power broken wire or short to ground. if power to both areas bad gauge.
A faulty temperature sensor, a wiring issue, or a blown fuse could cause a temperature gauge to stop working. It could also be due to a malfunction in the gauge itself.
if you disconnect the o2 sensor cable in the air intake then start the engine you would see the check engine sign turned on in the gauge panel. It is on then the sensor is working if off the the sensor may have problems
How can I check the ENGINE COOLANT TEMPERATURE (ECT) sensor on my 1991 HONDA PRELUDE SI 2.1L
It is possible that the temperature gauge has stopped working in a 1992 Tempo due to a blown fuse. It is also possible that the temperature gauge stopped working do to the temperature sensor in the engine having a short.
Temp. sensor my have stopped working. Quick and fairly easy fix.
It sounds like a bad Temperature Sensor or the Gage It's self.
check your fire wall