Some have sealed units. Need to repair leak Some models have a fill plug on top.
start bypassing the safety kill switches< or check they are working with an ohm meter
Check your chair switch!
finger it
I do not find a listing for this machine, but a check of the vendor number(944) reveals that it was assigned to Husqvarna.
Dipstick on transmission top-right
on two hex head plugs about at your foot
Check your shear pins.
The Massey Ferguson 231 tractor typically uses a Universal Tractor Transmission Fluid (UTF) that meets the specifications of MF 1135 or equivalent. It's essential to check the owner's manual for the recommended fluid type and any specific requirements. Using the correct transmission oil is crucial for optimal performance and longevity of the tractor's transmission system.
To check the transmission oil on a 1130 Massey Ferguson tractor, first ensure the tractor is on a level surface and the engine is off. Locate the dipstick or fill plug, usually found on the side of the transmission housing, and remove it to clean and then reinsert without screwing it back in to check the oil level. The oil should be within the designated range on the dipstick; if it's low, add the appropriate transmission oil as specified in the operator's manual. Always check for leaks and ensure the oil is in good condition.
Contact Sears or check their web site.
Check with Sears. Craftsman is the Sears brand.
The level check for the hydraulics/transmission/rear axle is pipe plug on the left side of the tractor just in front of the rear axle housing. Oil is supposed to be at that level with all hydraulics extended.