It uses the engine oil aswell. just check your engine oil that's it.
how to check the fluid on a manual transmission for a 1989 ford probe gt
There is no external transmission reservoir. Transmission fluid is stored in the transmission. Fluid is added at the same point at which you check the fluid level.
The 1989 Mitsubishi transmission fluid tank can be found on the bottom of the transmission. The transmission fluid tank is known as the transmission fluid pan.
most have drain plug on side of transmission
check the transmission fluid first
To check the transmission fluid in a 1989 Dodge Colt with a manual transmission, locate the fill plug on the side of the transmission case. Remove the plug, and the fluid level should be just below the hole; if you can touch the fluid with your finger, it's at the correct level. If it’s low, you can add the appropriate manual transmission fluid through the fill hole. Always ensure the vehicle is on a level surface when checking the fluid.
You add automatic transmission fluid to a 1989 V6 3.0 Toyota pickup truck through the filler tube in the engine compartment. This is also used to check the fluid level.
To check the transmission fluid level in a 1989 Ford E350, start the engine and let it warm up to normal operating temperature. With the engine running, locate the transmission dipstick, usually found near the back of the engine bay. Remove the dipstick, wipe it clean, reinsert it, and then remove it again to check the fluid level. The fluid should be between the "Full" and "Add" marks on the dipstick; add fluid if necessary, ensuring it's the correct type for your vehicle.
The 1989 Pontiac Sunbird with a 5-speed manual transmission does not have a traditional transmission dipstick like automatic transmissions. Instead, to check the transmission fluid level, you need to locate the fill plug on the side of the transmission case. It's typically a hex or square plug that can be removed to check the fluid level; the fluid should be at the level of the fill hole. If necessary, you can add fluid through this hole using a pump or funnel.
To add transmission fluid to a 1989 Plymouth Horizon, locate the transmission dipstick tube, which is typically near the back of the engine compartment. Remove the dipstick, wipe it clean, and insert it back into the tube to check the fluid level. If it’s low, use a funnel to add the appropriate type of transmission fluid through the dipstick tube until it reaches the proper level. Always ensure the vehicle is on a level surface and check the fluid level with the engine running in park.
To add transmission fluid in a 1989 Dodge Dynasty, locate the transmission dipstick tube, which is usually found near the back of the engine bay. Remove the dipstick, and using a funnel, pour the appropriate type of transmission fluid into the tube. Be sure to add fluid slowly and check the level frequently to avoid overfilling. Always consult your owner’s manual for the correct fluid type and capacity.
you need to check your transmission fluid, if that is alright then you need to get it rebuilt