answersLogoWhite

0

"Check the tread by using the "penny test." Take a penny, and place it upside down with Lincoln facing you in the center of the tread (at the thickest part of the tire).

If you can see the very top of Lincoln's head or the copper above it, replace the tires immediately.

If Lincoln's hair on the top of his head is partially visible, it is time to go shopping for tires.

If you cannot see the hair on the top of his head (if the coin is inserted enough that the tire tread is at least as deep as Lincoln's forehead), your tires do not need replacing yet. " ~ WikiHow

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do I tell when it's time to replace my tires?

Generally you replace them every 30,000 miles. You can also tell if the tread is worn down. You can check the depth of the tread with a penny.


How do you do the "penny test" to tell if you need new tires?

You put a penny into the tread with Abraham Lincoln's head facing the tire. If the tread covers up Abe at all, then you're good. If not, get new tires!


In California what is required tire tread depth in inches?

In California, the legal minimum tire tread depth is 1/16 of an inch, which is equivalent to 0.0625 inches. To ensure safety, it's recommended to replace tires before they reach this depth. Drivers can use the "penny test" to check tread depth; if Lincoln's head is visible when the penny is inserted into the tread, it's time for new tires.


How deep are the treads in general tires?

The treads are generally about a half inch deep. To check for safe tread depth use a penny, if you can't see the top of the head of Abe Lincoln then the tread is fine.


What coin would be useful to measure an object?

A penny can be used to measure for safe tread depth on your car tires. Hold the penny upside-down in a tread groove. If the top of Lincoln's head is visible above the tread wall, the tires are completely worn out, and need to be replaced, pronto.


How do you measure the tread depth for motorcycle tires?

You can use a penny for that. Put in between the threads then mark and measure the depth on the penny.


How can I know if my car's tires are worn out?

Always check for visable damage to the tire itself. If there is no visible damage, the easiest way to check tire wear is the penny test. Place a penny "head down" into the groove of a tire, If you can see the top of it's head, your tires need replace, legally. However, you should replace your tire when the tread is reduced below 4/32 of a inch. The easiest way to measure this is actually to us the "Quarter test". Do this test the same as the penny test on with a quarter, for a more accurate reading or check your tires "wear bars" which are bars within your tread that are below the tread and are the minimum safe depth for your tire.


How much visible tread should your tires have?

Tires should have at least 2/32 of an inch of visible tread for safe driving, although 4/32 of an inch is recommended for better traction, especially in wet conditions. You can use a tread depth gauge or the penny test—placing a penny in the tread with Lincoln's head down; if you can see his entire head, it's time to replace the tires. Regularly checking tread depth helps ensure optimal performance and safety on the road.


What is the legal minimum tire thread for depth on your tire IN CALIFORNIA?

In California, the legal minimum tread depth for tires is 1/32 of an inch. However, it is recommended to replace tires when they reach 2/32 of an inch for better safety, particularly in wet conditions. To check tread depth, drivers can use the penny test or a tread depth gauge. Regularly inspecting tire tread is essential for vehicle safety and performance.


What is the minimum tread depth for front tires and other tires?

Turn a United States penny upside in the tread. If you can see all of President Lincoln's head, your tire is bald.


How many miles before I should switch auto tires?

Some say to change your auto tires every 5000 miles. Other people just check the tread on their tires and when the tread looks worn, they switch their tires.


96 jetta shakes when driving between 20-40?

Most likely tires..check for worn spots or "bumps". After you speed up, tire rotates so fast its not as noticable. Usually front tires will cause this. Rotating may help. Old trick is take a penny and stick in tire tread to make sure tires have enough rubber to be safe, should cover Lincon's head when penny is put head first to measure tire tread depth.

Trending Questions
How old is bumblebee in transformers animated? Where's the fuel filter on a 2003 protege? What does code p1698 mean for 1997 Chrysler town and country? My car died on me and I put in a new alternator because my battery was fine and that ended up killing the battery and so I put a new battery in and the battery meter still says its low. can you help? Is coil packs over the spark plug? Were is the fuel filter on a 2007 dodge diesel 6.7? Can bad wheel bearings ruin rotors? Where and What kind of wires are needed to replace the cables for the battery terminals? Why does your car accelerate when the brake is pushed? How often should you change your underwear and why? What does a deutsch D365 oil filter fit? Is PVC valve on a dodge ram 1500 2002 truck located on the passenger side valve cover you pulled this black plastic thing off but struggled putting it back on you did have check engine light but no mo? How do you replace brakes pads on 2001 solara? Where can you purchase transmission fluid? Mazda 323F 16i 1991 The engine runs but there is no turn signal indicator light no light in the dash board when I start the car but there is the emergency light what is the problem? What problem will occur with oil pressure gauge needle not working? Is charcoal lighter the same thing as lighter fluid? How much for a tayota Celica clutch? Is there a fuel filter external of the fuel tank on a 2005 Dodge Grand Caravan with the 3.3L V6? How much does it cost to replace the timing belt on a 1997 RAV4?