1. Attach the jumper cable positive + (red) terminal to the good battery positive + (red) terminal.
2. Attach other end of + jumper cable to + terminal of dead battery.
3. Attach negative - (black) jumper cable terminal to negative - terminal of good battery.
4. Attach the last jumper cable negative - (black) to a metal ground part of the engine you are trying to start.
5. Start the engine of the donor vehicle and let it run for about 5 minutes to allow some charge to be applied to the 100% dead battery.
6. Start the car and have a helper immediately remove the connections in reverse order of how you connected them.
Warning: Be careful the jumper cable will not be hit by the cooling fan blades when the engines are started.
Just connect the battery to the motorcycle battery cables with jumper cables and then start it.
To jumpstart a car, firstly you need jumper cables. You will connect the jumper cables to the Volvos battery and connect the other end of the cables to another cars battery and give that car gas to help send a jolt to the Volvo.
The ground cable could be bad as well as check all cables for corrosion.
Sure, connect it to the car with jumper cables.
Connect cables appropriately and then push power button on front of console
Connect the bad battery to a good battery with jumper cables. Connect the positive terminals first, then the negative terminals. Now try to start the engine. When finished, disconnect the jumper cables in reverse order.
You can jumpstart your BMW 328 by connecting jumper cables to your battery and to the battery of another vehicle. Connect the red handles to the positive post, on each battery. Connect the black handles to the negative posts, on each battery. Start the working automobile to charge the nonworking battery.
connect another cars battery with jumper cables. Will power the trunk motor, and allow it to be closed once cables are connected ( PROPERLY ). You might even be able to jump start car. Good luck
You connect the jumper cables to the jump start posts under the hood on the passenger side.
you dont. its automatic. or, you just connect the battery cables to their corresponding posts.
You can jumpstart your BMW 328 by connecting jumper cables to your battery and to the battery of another vehicle. Connect the red handles to the positive post, on each battery. Connect the black handles to the negative posts, on each battery. Start the working automobile to charge the nonworking battery.
unhook your battery for a half hour reconnect your cables you should be back in business. always shut off your computer controlled vehicle connect the cables and then start your vehicle. hope this helps.