Assuming the truck has a 12 volt system, connect the batteries in parallel, that is positive to positive and negative to negative.
amps
connect the 2 six-volt batteries together one terminal each positive to negitive, this will make a 12-volt combination, then you can connect the jumper cables, one side to the 12-volt battery and one side to the two 6-volt terminals, + & -
you only need two 12 volt batteries to make 24 volt. connect them in series
Connect them in series.
A group of ten (10) batteries composed of 6 Volt and 12 Volt types will have six (6) each, 6 Volt and four (4) each 12 Volt batteries. The contributing voltages will be 6x6 and 12x4 for a total of 84 Volts.
Connect two 6 volt batteries in series. Connect the other two 6 volt batteries in series. Now connect those 2 pairs you have together in parallel. You will end up with 12 volts.
Yes you sure can.
Twelve volt batteries can be used for a number of different things. For example they can power small electronic devices. There are also a number of different brand such as Energizer and Deltran.
A twelve volt charger will charge twelve volt batteries only unless it has a feature that allows you to change the chargers voltage. But on fast or slow charge 12 volts is 12 volts so most 12 volt chargers are only good for 12 volt batteries.
The charger needs to be set to charge for the voltage that the battery is designed to produce. Most car batteries are 12 volt batteries.
depends on manufacture, Ford 1956, GM 1955, etc.
Take 3 twelve volt batteries Run the + of battery #1 to the - of battery #2. Run the + of battery #2 to the - of battery #3. Use the + of battery #3 for your positive feed, and the - of battery #1 for your ground.