The alternator slides with the alternator bracket. Loosen the bolt that goes through the bracket into the alternator. You may need to loosen the bolt on the bottom as well. Don't remove either. Then slide the alternator towards the opposing pulley to loosen the belt enough to disengage.
Remove the neg battery cab;e then the wires on the alternator.. Disengage the belt and take the mounting bolts out of the alternator. There should be a routing schematic for the belt on the fan shroud.
Alternators are not in a fused circuit. If your alternator isn't working, it's because either the belt is broken, there is a shorted circuit somewhere, or the alternator is faulty.
Disconnect the battery. Remove the serpentine belt. Unhook the wires from the alternator. Remove the mounting bolts, and remove the alternator. Reverse the process to install the new unit.
You should remove the positive battery cable from your 1997 Ford F1 50 battery. Remove the alternator belt. Remove the wiring harness. Remove the alternator retaining bolts.
hat is the serpentine belt routing for 1990 ford 150 4.9
No you do not.
Ford dealer
To remove the alternator from a 1992 Ford E-150 van with a 6-cylinder engine, first disconnect the negative battery cable to prevent any electrical shorts. Next, remove the serpentine belt by loosening the tensioner pulley, then unbolt the alternator from its mounting brackets. Disconnect the electrical connectors and the battery cable from the alternator before carefully lifting it out of the engine bay. Reverse these steps to install the new alternator.
dose 07 ford 150 have timing belt or timing chanin
It will cost you $0.00, due to the fact that a Ford F-150 does not have a timing belt, it has a chain that requires no maintenance.
I need the routing for the serpentine belt for 1990 Ford 150?
how to install alternator2001ford f150