I have heard of welder's being able to tig weld aluminum head cracks,but have not seen it done with my own eyes. Would probably be cheaper in the long run to replace with junk yard or rebuild.
You can't fix a cracked head unless you can weld. it must be replaced with a new head.
A machine shop may be able to repair the head but my advice is to replace a cracked head.
At the minimum the head will need replaced.
Yes! if you have a cracked head chances are your oil and coolant are mixing together and coolant and or oil is leaking out causing the vehicle to overheat... if you have a cracked head fix it! do not drive the vehicle
A machine shop may be able to repair the head but my advice is to replace a cracked head.
buy new headers you probably cracked or bent one
An exhaust leak is usually the result of a bad gasket or a cracked manifold. For a proper fix, either the gasket or both the manifold and the gasket must be replaced.
The only fix is to replace the gaskets. Also check to make sure the head is not warped or cracked.
No, the head must be removed and replaced.
it sounds like a cracked head or a bad gasket from water port to exhaust port it wouldn't get water in your oil if this is the case.The best repair is to fix it right. Stop leak can cause more harm than good.
If your referring to the engine block, the motor has to be replaced. If your refering to a cracked head, the head has to be replaced. Contact a service technician you can trust. a cracked block cannot be repaired. The only option is to replace the engine.
You must replace the head gasket.