To fix the rear brakes on a Corsa bakkie, first, safely lift the vehicle and remove the rear wheels. Inspect the brake components, including the brake shoes, drum, and hardware for wear or damage. Replace any worn or damaged parts, clean the drum, and ensure proper adjustment of the brake shoes. Finally, reassemble everything, test the brakes, and ensure they function correctly before lowering the vehicle.
Will require more specifics, what part you want to fix in the rear brakes?
what type of rear brakes does a chevy malibu require
The rear brakes on a 1989 jeep should be self adjusting. Tear the drums off and fix the seized or broken hardware.
www.parktool.com has a nice walk-through, as well as www.sheldonbrown.com
the brakes were not fixed properly some part is installed wrong
If the rear wheel brakes are locking up on a vehicle they should be thoroughly checked. The master cylinder may need to be replaced on the car.
that depends greatly on what is wrong with them.
If it is a Toyota, they do not know how to fix the squeaking brakes either. Even after replacing all the pads and machining the rotors and rear drums
Try adjusting the rear brakes.
To fix the rear brakes on a bike, first, check the brake pads for wear and replace if necessary. Next, adjust the brake cable tension to ensure proper braking. Make sure the brake calipers are aligned and centered on the wheel. Test the brakes to ensure they are working correctly before riding.
The only way to tighten the rear view mirror on a Vauxhall Corsa is to replace the base. It is glued onto the window and gluing a new one or re-gluing the old one is the only way to fix a loose mirror.
To fix the rear washer pipe on a 1996 Corsa, first, inspect the pipe for any visible damage or disconnections. If you find a leak, cut out the damaged section and use a suitable connector or repair tape to seal it. Additionally, ensure that the connections to the washer pump and nozzle are secure. Finally, test the system by activating the rear washer to check for proper operation.