I have removed many with this procedure get a good quality socket slightly smaller than the locking nut hammer it on to the locking nut but no to split it that's why you need a good quality socket, Chrome Vandium spec, then attach the wrench to undo the locking nut.CozyMerc.
Locking lug nuts are just as strong as standard lug nuts, just as long as they are correctly installed with the proper locking lug nut key wrench.
There could be if you have locking lug nuts.
To remove a lug nut from a Land Rover Discovery, first ensure the vehicle is on a flat surface and securely lifted using a jack. Use a lug wrench or socket wrench to turn the lug nut counterclockwise. If the lug nut is stuck, apply penetrating oil and give it time to soak, then try again. Always ensure the correct size socket is used to avoid stripping the nut.
go to the dealer and buy yourself a key.
A punch nut is not a locking nut
take it to a tire shop. they have a special scoket that will remove it.
The lug nut size for a 240sx with a four lug pattern is 10x1.25. The lug nut size is 12x1,25
The Honda CR-V lug nut size is a 19 mm lug nut. The 2000-2002 size was a 21mm lug nut.
Not aligning the threads up correctly and forcing the lug nut onto the wheel stud will strip the lug nut.
Any storage compartment inside of carand trunk, specially in spare tire kit.
are u looking for a lug bolt or nut cause the lug bolt cost like 2 bucks and the lug nut cost like 5 bucks
Locking lugnuts can be removed without the key by having a lugnut remover socket set. The sets contain sockets that fit on the lug and after hammering them on quite fittedly, they will turn off.