IT MAY BE A SENSOR LIKE A O2 HAVE IT CONFIRMED TO FIND OUT FOR SURE ,IF IT IS A SENSOR AND THE CAR IS RUNNING FINE THEN COVER THE LIGHT WITH ELECTRICAL TAPE IF IT DON'T GO OUT
Answer Disconnect the battery for about 10 minutes.. If it comes back on then something is throwing a code and you need to determine the problem.. Most times you just left the gas cap loose.
i have a 1994 eclipse with a 1.8 we replaced the head gasket and timeing belt now it sputters at low rpms an the check engine light is on what could be th problem ?
The computer doesn't allow to start the engine. Check the error code.
Might Be Yr running out of oil, or water levels are low.
you have to go to a autoparts that check and see what codes come up
it resets every time you turn your car on. i have a 01 eclipse and the dealer told me that.
Trouble code P0170 means:Fuel trim malfunction (Bank 1)
Any OBD II code reader will do the trick.
how i reset check enging light manually at mitsubishi fuso 4m50
DISCONNECT THE NEGATIVE BATTERY CABLE
disconnect the positive connector on the battery
Yes it is the same thang.I was not to sure before to but i look though the book on the car and i found out that the lights are the same..
Alot of the times you can disconect the positive terminal from the battery and leave it off for 30 minutes or so then put it back on