answersLogoWhite

0

i had to do this same thing just the other night. First at both ends of the bumper there is a supporter that has a Y at each end. first remove the bolt at the bottom of that. Then there are about 4 more bolt that connect to the frame in the center of the bumper remove those and if you removed the right bolts. it should come off.

User Avatar

Wiki User

∙ 17y ago

What else can I help you with?

Related Questions

How do i remove rear bumper on 1994 explorer?

The 1994 Ford Explorer rear bumper is held in place with eight retaining bolts. Remove the retaining bolts and the rear bumper will come off.


How long is a four door Ford Explorer from bumper to bumper?

According to the ( 1999 ) Ford Explorer Owner Guide , the 4 door is ( 191.2 inches long )


Can damage to Ford Explorer Eddie Bauer bumper be banged out or repaired anyway other than replacing the bumper?

no you have to replace the bumper


Where is the Spare Tire Located on a 1998 Ford Explorer?

Underneath the Explorer , just ahead of the rear bumper


Spare tire location in 1998 Ford Explorer?

Underneath the Explorer , just ahead of the rear bumper


Can a front bumper of a 1994 Ford Explorer fit a 1994 Mazda Navajo?

yes it will


How do you stop rattle in backdoor ford explorer sport 2001?

rivits in bumper are loose


Will front grill and bumper parts from a 97 Ford truck fit a 98 Ford explorer?

Only if the 97 truck you are talking about is a Ranger. Then yes, it will fit the Explorer.


How do you remove rear bumper on 1999 ford explorer?

I think I will be posting a video on you tube shortly. I have not only removed a damaged bumper, but fixed brackets and installed new bumper.


Where is the daytime running light module on a 1996 Ford Explorer?

The daytime running light module on a 1996 Ford Explorer can be found behind the bumper. It is on the driver's side of the car.


Where is the outside temperature sensor on a Ford Explorer?

Behind the bumper on the battery side. It sits on the rail.


Will the rear bumper of an explorer fit on a explorer sport?

The rear bumper of a Ford Explorer may not fit directly onto a Ford Explorer Sport due to differences in design and dimensions between the two models. While they share some components, variations in styling and features often mean the bumpers are not interchangeable. It's best to consult the specific year and model specifications or a Ford dealership for confirmation.

Trending Questions
How do you replace fuel pump on Pontiac 2005 sunfire? Which brake fluid should you use in 1994 Chevy silverado dot 3 or dot4? Where is Chrysler voyager 2000 oil light sensor? What is cylinder location on 3.8l Windstar? Can you substitute a 185 60 r14 on a 175 65 r15 tire? Where do i find a garage door spring? When should you use overdrive? How does a fuse protect equiptment? Can you screw a c7 bulb into an e26 socket? How long do the effects of antifreeze stay in your system? Burnt some wires on a bad jump start battery won't charge replaced alternator still nothing rpm and speedometer gauges don't work either Could it be an fusible link? Can you use synthetic oil in a 25HP Kawasaki engine? What is color of the filament as you turn the switch at full power? Is avauxhall corsa c12nz crankshaft same as a x12sz one? My 86 toy 4runner has a leak in the gas line between the tank and fuel filter.It is on the meatle line. Can I splice it or do I have to drop the gas tank and replace the line all the way up the fram? If you have one hp hewlett packard multimeter model E2378A Problem occur no display new pen light bsttery fuse good. please evaluate the problem? Do turbo charged cars use more fuel? Where can you find information on predominance area diagrams? 1994 Chevy Astrovan Replaced battery and replaced starter If you turn the key it clanks and whines but still won't start What else could be wrong? When you turn your turn signal on the wipers turn on as well what is the problem?