answersLogoWhite

0

After you remove the rear brake drums, & brake shoes from the backing plate, there are 4 Torx bolts that hold the entire hub assembly on the axle. These generally require alot of swearing & sweat to remove if they're frozen in the axle. The hub assembly most generally has to be pursueded out of the axle with a 5lb hammer. The new one will go back in about 100 times easier than the one you removed.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

How much play is normal in the rear hub of a dodge caravan?

End play from 5>12 thousands.


Nut size rear hub 02 dodge neon?

30


How do you change wheel bearings on 1998 cavalier?

Both the front and rear bearings on a 1998 Cavalier are contained in the hub assembly. The rear hub is attached with four bolts, and the front with three.


2005 dodge neon rear hub nut size?

30 mm


What is front wheel hub nut size on a 2001 dodge caravan?

It requires a 1 1/4 inch socket.


Are the front wheel bearings on a 1998 Dodge pickup replaceable or do you have to replace the hub assembly?

youll most likely have to buy the whole hub assembly. I had to do that to my 94 dodge dakota.


I have a 2001 dodge neon. I am replacing the rear hub assembly. does anyone know the rear wheel bearing torque?

The rear wheel torque spec for a 2001 Dodge Neon is 160 foot pounds.


How do you replace a wheel hub assembly bearing seal on a 1993 dodge shadow?

Front is easy, just replace hub rear is pressed in


What is rear drum hub torque on 2004 dodge neon SE?

160 ft lbs


How do you remove the rear hub on a 2000 Dodge Caravan?

If the hub won't slide off the studs freely you may have to remove the rubber insert on the back of the brake shoe plate and loosen the shoes by sticking a narrow bladed scredriver through the opening and turning the adjustment screw. Hope this works or at least helps.


How do i Remove rear brake hub on 1973 dodge 1 ton truck?

You have to remove the center of the axle plate and the axle to remove the brake hub.


Are the bolt patterns the same for a 1998 Dodge Ram and a 2004 Dodge Ram?

The bolt pattern is the same, but the hub is longer on the 1998 Ram 2wd. The 2004 style wheels may not fit on the 1998.The bolt pattern is the same, but the hub is longer on the 1998 Ram 2wd. The 2004 style wheels may not fit on the 1998.