MPVclub.com has a somewhat detailed description on how to do it. If you remove the plastic you will expose three of the six. Then you have to remove the plenum/manifold. Check out the details on the website. Hope this helps.
The spark plug gap on a 2002 Mazda 626 should be set at .044 inches. A new spark plug will come preset from the factory.
car stalled at red light and will not start. there is no spark from spark plug, help!
44
1.1mm(.044in)
.44
To replace the spark plugs on a 2002 Mazda MPV, start by locating the spark plug wires and carefully disconnect them. Remove the ignition coils or any covers that may be obstructing access to the spark plugs. Use a spark plug socket and ratchet to unscrew the old plugs, then install the new plugs by hand to avoid cross-threading, followed by tightening them to the manufacturer's specifications. Finally, reconnect the ignition coils and spark plug wires.
what is spark plug for mazda tribute 2004
What's the spark plug gap for 2003 Mazda 2300 pic up ?
It is important to remember the spark plug gap when changing the spark plugs of a vehicle. A 1998 Mazda B2500 has a spark plug gap of 0.042 to 0.046 inches.
To replace the spark plugs on a 2002 Mazda 323 Astina, start by ensuring the engine is cool and disconnect the negative battery terminal. Remove the ignition coil or spark plug wires, depending on your engine configuration, and use a spark plug socket to carefully unscrew the old spark plugs. Before installing the new plugs, check and adjust the gap as specified in your owner’s manual. Finally, install the new plugs, reconnect the ignition components, and reattach the battery terminal.
Where are the spark plugs on a 2004 mazda rx8?
The spark plug gap on a 1994 Mazda 1.8L MFI DOHC is .044 (thousandths of an inch)