You locate cam-sensor check for loose or broken wires ,if this doesn't work replace cam-sensor.
Locate the camshaft sensor in your car. Disconnect the electrical plug on the sensor. Remove the bolt that holds it in place. Twist the the sensor to remove it and place in the new one.
To change the camshaft positioning sensor on a 98 GMC Jimmy you need to first locate it. The sensor is located within the distributor. Next, unbolt the old sensor and replace with a new sensor.
The camshaft position sensor is located near the thermostat housing. You should replace the crankshaft position sensor as well. This one is much harder to locate....it is on the backside of the engine that is between the firewall and the engine block. Both use the same sensor.
In order to replace the camshaft position sensor, you would need to disconnect the electrical plug holding it in. Using a socket, hold down the bolt and remove the camshaft position sensor.
The camshaft sensor on the 99 Olds Intrigue is located on the engine block. It is under the starter, which has to be removed to locate the camshaft sensor.
To replace the camshaft position sensor on a 2000 Daewoo Leganza, first, disconnect the negative battery terminal for safety. Locate the camshaft position sensor, which is usually found near the cylinder head. Remove the electrical connector and unscrew the sensor from its mounting. Install the new sensor by reversing the removal process, ensuring it's securely fastened and reconnect the battery.
To replace the camshaft position sensor on a 2000 Lincoln Navigator, first disconnect the negative battery cable to ensure safety. Locate the camshaft position sensor, which is typically found near the front of the engine, near the camshaft. Remove the electrical connector and the mounting bolts holding the sensor in place. After taking out the old sensor, install the new one, secure it with bolts, reconnect the electrical connector, and then reconnect the battery.
How do u replace the camshaft sensor for a 2000 Nissan xterra 3.3L and where is its locatoin
To replace the camshaft position sensor on a 2005 Nissan Pathfinder, first, disconnect the negative battery terminal to ensure safety. Locate the sensor, which is typically found near the camshaft on the engine. Disconnect the electrical connector and remove any mounting bolts holding the sensor in place. Install the new sensor, secure it with bolts, reconnect the electrical connector, and then reattach the battery terminal.
To change a 305 cam sensor, locate it beside the camshaft. Disconnect the electrical plug of the sensor and remove the hold-down bolt to take off the cam sensor. Replace with new.Ê
how do you replace the camshaft position sensor on a 1997 plymouth voyager 3l