Use a small precision flat head screwdriver. You can try a butter knife but you may damage the plastic.
To open a 2015 Mazda key fob for a battery change, locate the small notch on the side of the fob. Use a flathead screwdriver or a similar tool to gently pry open the fob at this notch. Once the fob is open, you can remove the old battery and replace it with a new one, ensuring the positive side is facing up before snapping the fob back together.
Changing a Mazda 2 battery in the key fob is quite simple. You will need to use a flat head screwdriver to pry open the fob. You will then take the battery out with the screwdriver and replace it.
To change the key fob battery in a Peugeot 307, first, locate the small slot or indentation on the fob. Use a flathead screwdriver or a similar tool to gently pry open the fob. Once open, remove the old battery, noting the orientation, and replace it with a new CR2032 battery. Finally, reassemble the fob by snapping it back together.
The key fob battery on a 2008 Nissan Altima is replaced by using a coin to open the rear of the case. The battery can then be popped out and a new one installed.
The key fob battery in an 02 Buick Rendezvous is changed by prying the case open using a coin or screwdriver. The battery can then be pulled out and a new battery installed.
Use a dime to open the key fob battery door on the key fob. New batteries are typically available at Radio Shack. Salesperson at same usually know how to open it.
There is a notch to pry the cover open. It should be visible after removing the metal key. Open it then the battery can be replaced.
pop it open, two batteries + side down
how to open and change the battery of ford focus 56 reg
How do you change the battery in mazda 5 key?
Open the key fob and remove the battery which has a # on it, and then buy a duplicate.
To change the battery in a 2003 Hyundai Tiburon key fob, first, use a flathead screwdriver to gently pry open the fob along the seam. Once open, carefully remove the old battery, noting its orientation, and replace it with a new CR2032 battery, ensuring the positive side is facing up. Finally, snap the fob back together until it clicks securely. Test the key fob to ensure it functions properly after the battery replacement.