0
What else can I help you with?
What hose type is used to transfer water to the pump intake from a pressurized source only?
hard intake hose
Where is the air intake temp sensor in a corolla 98?
The 1998 Toyota Corolla air intake temperature sensor can be found on the air intake hose. The air intake hose will come from the air intake box and proceed to the engine.
How do you change the water hose under the intake?
What's under the intake is not a hose, it's a pipe which a hose attaches to behind the intake manifold near the firewall. If the hose is leaking, it's a relatively easy task to replace it. If the pipe is leaking, you will have to remove the intake manifold which is not an easy task (minimum 6 hours to remove and replace the manifold!)
What is an PVC hose exactly?
a PVC hose is a hose connected to the back of the intake manifold to the front of the engine
What hose connects to the air intake before the throttle body in a 1988 Volvo v6 740 GL?
In a 1988 Volvo V6 740 GL, the hose that connects to the air intake before the throttle body is typically the intake air duct or intake hose. This hose directs airflow from the air filter to the throttle body, ensuring proper air intake for the engine. It's important to ensure this hose is free of cracks or leaks for optimal engine performance.
Where is thermostat on 1994 silverado?
The thermostat is on top of your intake manifold, on the front side. Locate the radiator hose that runs to your intake, take the hose off and the thermostat will be sitting on the manifold under the hose.
What is the cause of a runaway engine on a 2005 dodge neon?
Check the black hose between the throttle body and intake manifold.Check the black hose between the throttle body and intake manifold.
How do you take off the heater hose that is connected to the intake on a gm 350?
To remove the heater hose connected to the intake on a GM 350 engine, first ensure the engine is cool to avoid burns. Locate the hose clamp securing the hose to the intake, then use a pair of pliers or a screwdriver to loosen the clamp. Once the clamp is loose, carefully twist and pull the hose off the intake. If the hose is stuck, you may need to wiggle it gently to break the seal before removing it.
Where does the hose under the intake run to on a ford crown vic 4.6L?
There is no hose under the intake. If it is leaking coolant it is because the intake manifold is cracked on the seam just behind the alt. You have to replace the intake with the modified one from Ford. It's a 6 to 8 hour job. Quote:There is no hose under the intake. If it is leaking coolant it is because the intake manifold is cracked on the seam just behind the alt. You have to replace the intake with the modified one from Ford. It's a 6 to 8 hour job. There actually is a hose under ther intake but I am not sure where it leads. I had a pin hole in mine and have gotten to the hose but have not changed.
What is the name of the hose that connects to the air intake to the radiator?
No hose connects from the air intake to the radiator. It may connect to a bracket mounted not the radiator but it does not connect to the coolant. If that is what you are stalking about it is called an air intake tube.
What are the air intake hose connections for a 2000 Chevy tracker 4door with 4wd?
if you are asking what secures the hose...hose calmps!
How do you change PCV valve for 93 dodge Dakota?
Pull it out of the valve cover, twist it out of the hose from the intake. Reverse steps to reinstall.Pull it out of the valve cover, twist it out of the hose from the intake. Reverse steps to reinstall.
