A mechanical packer.
On the exhaust pipe between the exhaust manifold and the catilitic converter. Looks kind of like a spark plug screwed into the pipe.
with water and towels. but remember to use an exhaust plug so you don't get water inside your exhaust pipe.
In the exhaust pipe under car about in line with firewall. You will see a wire coming down from firewall into a plug in exhaust.
Look on the exhaust pipe ahead of the catalytic convertor for a spark plug sized sensor screwed into the pipe. On a 1988 Cheyenne it is located on the left side of the engine on the exhaust manifold.
before the cat converter on the exhaust pipe on the passenger side of the motor, down beside the gearbox. has a large nut on the side of the exhaust pipe and a wiring harness and plug coming out of it.
Unburned fuel in the exhaust system causes the backfire from the exhaust pipe.
In the exhaust pipe, near the engine.In the exhaust pipe, near the engine.
In the exhaust pipe, at the back of the engine.In the exhaust pipe, at the back of the engine.
It is in the exhaust pipe on the back of the engine.It is in the exhaust pipe on the back of the engine.
It should be under the gas tank or slanted above the exhaust pipe on the front of the motor.
To reduce the noise created by the exhaust gases.
Exhaust pipe right before or in between the catalytic convertor. youll see it. Its a plug sticking out of the pipe with a wire runnign back to your truck