Rotate the crank pulley at the bottom of the engine until the dimple is at top dead center.
Use a second socket set to rotate the intake and exhaust cam sprockets so that the "I" (intake) is at the top dead center on the intake cam, and "E" (Exhaust) is at the top dead center of the exhaust cam.
Place the timing belt on the engine. You may need a tool or helper to keep the crank pulley in place while you apply the timing belt.
Test your placement by rotating the crank pulley two full rotations. Verify that the intake and exhaust cams return to the original positions - I and E at the top of the cam gears.
The camshaft position sensor on a Mazda Miata is changed by disconnecting the wiring harness and unscrewing the sensor using a wrench. The threads can then be cleaned and a new sensor torqued into place.
Will a 1992 mazda miata hardtop fit a 2000 mazda miata?
yes, the Mazda miata is rear wheel drive
I would suggest the Mazda Miata dealership site which is www.mmmiata.com, another site to try for Mazda Miata parts is www.autopartsdeal.com/Mazda/Miata/parts.html. For used parts you can try www.autoguide.net
There is no fan belt on a Mazda Miata.
On a 1999-2005 model Mazda Miata the camshaft position sensor is located on the valve cover towards the rear of the engine (closest to the firewall). It has one 3-pin connector connected to it and one 10mm bolt to remove the sensor
The 2003 Mazda camshaft position in sensor can be found on the back of the left-hand cylinder head. The camshaft position sensor should be labeled as such.
A 1999 Mazda Miata requires 4.0 quarts of oil.
You can rent a mazda miata from Zilok ( US.Zilok.com )
Where can you find a diagram for fuse panel in a 2003 Mazda Miata?
The 1992 Mazda Miata is equipped with a non-adjustable steering wheel.
The 2012 Mazda MX-5-Miata has 16 valves.