To properly dispose of used oil, take it to a recycling center or a designated drop-off location. Do not pour it down the drain or in the trash, as it can harm the environment.
The bottom part of the engine is the oil pan. There will be a drain plug on it, remove drain plug and oil will come out; properly dispose of oil.
The amount of used engine oil from a car typically depends on the engine size and type, but on average, an oil change requires about 4 to 5 liters of oil for most passenger vehicles. Larger engines or vehicles like trucks may require more, while smaller engines may use less. It's important to check the owner's manual for the specific oil capacity of a vehicle. Always dispose of used engine oil properly at designated recycling centers.
Contact the waste management authorities in your area for information about how to properly dispose of used motor oil. Your city, township or state should have disposal facilities. This article has a lot of helpful information: http://www.ehow.com/how_2282844_dispose-motor-oil.html
Most autoparts stores will take used oil for recyling. Local landfills generally take waste oil too.
Check your local Wal Mart auto department. Many of them will dispose it for you.
fire
To empty the oil reservoir in a 1993 Toyota Previa, first, ensure the engine is cool and the vehicle is on a level surface. Remove the oil drain plug located on the oil pan beneath the engine, allowing the old oil to drain completely into a suitable container. After draining, replace the drain plug securely and dispose of the old oil properly at a recycling center. Finally, refill the engine with the appropriate type and amount of new oil.
Take it to any auto parts store, Walmart, or any place that accepts oil for recycling.
Loosen the oil drain plug on the bottom of the oil pan, and let the oil drain into a container. Then remove and replace the oil filter on the engine. Replace the drain plug, put in the appropriate amount of fresh oil and you're good to go. But if you don't know how to do this at all, I wouldn't recommend trying it for yourself. Any shop will do the job reasonably cheaply. If you do it yourself, make sure to dispose of the used oil properly!
To add oil to a Club Car golf cart, first locate the oil fill cap, which is typically found on the engine. Remove the cap and use a funnel to pour in the appropriate oil type, checking the owner's manual for specifications. Be sure to monitor the oil level using the dipstick, if available, and avoid overfilling. After adding oil, securely replace the cap and dispose of any used oil properly.
To strain oil from a Sea-Doo, first ensure the engine is cool and the watercraft is on a stable surface. Use a siphon pump or a turkey baster to remove the oil from the reservoir or oil tank. If you need to replace the oil, it's best to use the manufacturer's recommended oil type and filter, ensuring to dispose of the used oil properly. Always check your owner's manual for specific instructions related to your Sea-Doo model.