To install a V-belt on a Rocam engine, first, ensure the engine is turned off and cool. Locate the belt tensioner and release tension by either loosening the tensioner bolt or using a wrench to pivot the tensioner arm. Place the V-belt around the pulleys in the correct configuration, ensuring it fits snugly in the grooves. Finally, reapply tension to the belt by returning the tensioner to its original position and tightening any bolts as necessary.
the 3.5 is a belt engine
Replacement for a "V" belt to drive engine accessories i.e. p.s., alternator, a/c compressor etc. A toothed belt offers a better grip and "wrap" than standard "V" belt
It has a timing BELT - recommended replacement mileage is 105,000 miles. CAUTION: This engine is an "interference" engine. If the belt fails while the engine is running it will cause major damage to the engine.
This is an interference engine and as such if the belt breaks you will have serious internal engine damage. The belt and water pump must be replaced every 105,000 miles.
V Belt is thin and V in shape, and is normally used to power a single component in a system of pulleys. Serpentine Belt is wider, and is used to drive multiple components in automotive engine, it loops continuous over several pulleys. In addition, V Belts are normally found in older automotives.
in the front of the engine it is driven by the timing belt.in the front of the engine it is driven by the timing belt.
The "v" belt is for the air conditioning. The serpentine belt is for the power steering and alternator.
Yes, it has a timing (cam) belt and it MUST be replaced every 105,000 miles. Warning: This is an interference engine.
The 2002 Honda CRV does not have a belt it has a chain which is designed to last the life of the engine.
two chains
VX belt is cogged V-belt
The Honda 2.2 diesel engine has a chain driven camshaft, not a belt driven one. The same applies to the 2 litre and 1.8 litre petrol engines but the earlier 1.7 litre engine is belt driven.