0
What else can I help you with?
How do you route a belt on an 1988 Chevrolet celebrity?
Routing of the serpentine belt depends on which engine your car has as well as whether or not the car has air conditioning. There should be a routing diagram under the hood of the car.
How do you change the serpentine belt on a 1988 Corsica?
Loosen the tensioner pulley on your 1988 Chevrolet Corsica. When the tensioner pulley is loose the serpentine belt will easily come off. Put the new serpentine belt on and tighten the tensioner pulley.
Do you have a diagram of how to put on a serpentine belt for a 1988 celebrity?
i had to do the same thing go to auto zone
How do you change a serpentine belt on a 2002 Chevrolet Avalanche?
You will need to loosen the serpentine belt tensioner pulley on your 2002 Chevrolet Avalanche. Slide the belt tensioner to the right. The serpentine belt will become loose and can be removed. Reverse the process to install the new serpentine belt.
How do you replace a serpentine belton a 1989 Chevrolet Celebrity?
To change the serpentine belt on a Chevy Celebrity: 1. Make note of the routing so you can get the belt back correctly. 2. Use appropriate breaker bar or ratchet to release the tensioner then take the old belt off. 3. Put the new belt in place, releasing the tensioner to get the belt over it.
Where can I find a diagram of a 1987 Chevrolet serpentine belt?
In the belt book at most autoparts stores have a diagram section for serpentine belt routing.
How do you replace a serpentine belt on a 1988 celebrity?
To replace the serpentine belt on a 1988 Celebrity: 1. There should be a routing diagram in the engine compartment. If there is no routing diagram take careful note of how the belt to be replaced is routed. 2. Use a suitable tool to release the belt tensioner, then slide the belt off of the idler pulley and then off of the other pulleys. 3. Route the new belt on all the pulleys to the tensioner. 4. Release the tensioner and slide the belt over the idler pulley.
1993 blazer serpentine belt diagram?
Where can i find a serpentine belt diagram for a 1993 s-10 chevrolet blaze?
Where can you find a diagram for serpentine belt assembly on 1999 Chevy Silverado?
The 1999 Chevrolet Silverado serpentine belt assembly diagram can be obtained from most Chevrolet dealerships. The diagram is usually provided when you purchase the serpentine belt.
2004 Chevrolet 3.8 v6 serpentine belt diagram?
Click the link.
What is used to apply tension to engine belts on a 4.8 liter Chevrolet?
If it has a serpentine belt it should have an automatic belt tensioner If it doesn't have a serpentine belt then alternator should be the adjustment/pivot point
When do you change the serpentine belt on a 2002 Chevrolet Malibu?
The belt is bad if it has 3 cracks per square inch.
