0
What else can I help you with?
How do you change a carburetor?
1. Remove Air Filter and All Duct work attached to the carburetor. 2. Disconnect Fuel Line (Label to aide in reattachment) 3. Disconnect all Vacuum Hoses (Label all to aide in reattachment) 4. Disconnect all wires (if so equipped) (label to aide in reattachment) 5. Disconnect Choke linkage (if equipped with manual choke) 6. Disconnect Throttle Linkage 7. Unbolt Carburetor and remove from manifold Reinstalling: 1. Obtain new gasket 2. Install new gasket onto manifold and carburetor onto gasket per manufacturers instruction 3. Torque carburetor bolts per manufacturers instructions 4. Reconnect Throttle Linkage 5. Reconnect Choke Linkage (if equipped with manual choke) 6. Reconnect all wires (This is where the labeling pays off) 7. Reconnect all vacuum hoses (Be sure to tighten clamps securely) 8. Reattach fuel line (Be sure to tighten clamp or fitting securely) 9. Replace Air filter and all duct work 10. Restart Vehicle to ensure proper operation.
Where does all the hoses from the carburetor go on a Honda dirt bike?
On a Honda dirt bike, hoses from the carburetor typically include the fuel line, which connects to the fuel tank, and the overflow or vent hoses, which help manage fuel overflow and pressure. The overflow hose routes excess fuel away from the carburetor, while the vent hose allows air to enter the fuel system. Additionally, there may be a drain hose to remove any fuel or liquid from the carburetor bowl. Proper routing of these hoses is crucial for optimal performance and to prevent leaks.
I have a 87 s 10 and i need the diagram for the carburetor hoses?
Not sure what engine you have but it probably has TBI (throttle body injection) not a carburetor. I think the last year for the carburetor was 1985. Give us more info on the engine.
Where do you get a diagram for air hoses connections on the Nissan Sunny B12 intake manifold and Carburetor?
I person needs to have a diagram when making any changes to a car. For a Nissan Sunny B12 the diagram to the air hoses connected to the intake manifold and carburetor can be found in the maintenance manual.
How do you change the fuel pump on a 1979 Chevrolet pickup truck?
get under the truck disconnect hoses unmounted old fuel pump...mount new pump reconnect hoses.
Where can you get a carburetor diagram with connected hoses metal and rubber?
you can look in the front of a chilton, or a haynes repair guide otherwise you may have to find someone with a similar vehicle and take a picture of their carburetor
Where does hoses connect to from carburetor on suzuki LT 185 quad runner?
i wish i new having the same problems
Will you give a diagram on vacuum hoses to and from the carburetor on a Mazda GLC?
i have a 1985 Toyota P/U repair manual could you tell me wat vaccuuum hoses u need a diagram for.
Where do the hoses go on 1995 polaris 300 explorer carburetor go?
There are three hoses on a Polaris 300 carburetor. The fuel line is the large one. One is a vent hose that goes nowhere, and the oil injector line connects to the small hose connector on the right side, nearest to the air intake. It goes straight out.
How do you get water out of your carburetor?
see if it has a screw at the bottom of the float bowl, if so unscrew it and all the gas/water will drain out the vacuum hoses
Where is the carburetor on a Honda rebel 250?
It is towards the front of the bike located right behind the engine. You might notice a lot of hoses connected to it.
Need a chart to show you where all the vacuum hoses go on the carburetor for a 1984 Chevy celbrity?
There should be a diagram on the right shock tower.
