They are held in place by a snap-ring under the boot. Feel free to rip the old boots off, as you'll be using new ones anyway.
For the money, though, it may well be worthwhile to just get remanufactured CV axles for about the same price and not have to get covered in CV grease and hammer bruises.
Yes it will.
Forward of the fuel tank
how to remove a sunroof in a 1998 Saturn 4 door sedan
To remove the ball joints on a 1998 Ford Ranger, first, lift the vehicle and secure it on jack stands. Remove the wheel and brake components to access the upper and lower ball joints. Use a ball joint separator or a hammer to carefully detach the ball joints from the control arms and steering knuckles. Finally, if the ball joints are pressed in, use a ball joint press to remove them from their housing.
remove belt, remove alternator plugs, then bolts. pull out alternator. then undo bolts for bracket and remove.
To remove the harmonic balancer on a 1998 Saturn SL2, you will need to use a harmonic balancer puller tool. First, remove any surrounding components that may impede access. Then, attach the puller to the balancer and use a wrench to slowly tighten the puller until the balancer comes off.
Remove the exhaust at the flange in front of the tank, drop rear exhaust, remove fuel filler neck and fuel lines that protrude from back of tank at the top, remove 2 tank straps, drop tank, remove pump
autozone.com has online manuals that give step by step how to
open hood. take out bolts. hold in hand. unplug wires. all done
How do you replace the ball joints on a 1998 Monte Carlo Z34??
Return of Saturn was created in 1998.
Viva Saturn ended in 1998.