Cut the nipple with a hacksaw blade from the inside in 4 cuts, top bottom and both sides BE careful not to cut into the threads of the female end so you can reuse this piece. Break out the nipple with a pair of pliers.
If the brass threaded nipple is a male end and the PVC side is a female end, wrapping thread tape around the nipple and then screwing it into the female PVC end will provide a secure and watertight connection.
Lead wipe a brass nipple into the lead pipe and then use a female adapter x PVC on the brass threads
To remove PVC from a fitting, you can use a heat gun or a hair dryer to soften the PVC material. Once softened, gently twist and pull the PVC pipe out of the fitting. Be careful not to overheat the PVC, as it can release harmful fumes.
To replace a spoke on a bicycle wheel, you will need to remove the tire and tube, loosen the spoke nipple, remove the broken spoke, insert the new spoke, and tighten the nipple to the correct tension. Finally, reassemble the wheel and adjust the spoke tension to ensure it is true and straight.
To change PVC valve on a 1993 Nissan 300zx, first remove the oil dip stick and remove the tension clip from the PVC valve hose. Then remove the hose and the old PVC valve. Replace with a new PVC valve.
To remove a PVC pipe from a fitting, you can use a heat gun to soften the PVC material and then twist and pull the pipe out of the fitting. Alternatively, you can use a PVC pipe cutter to cut the pipe close to the fitting and then remove the remaining piece. Be sure to wear protective gear and work in a well-ventilated area when working with PVC and heat tools.
try an "internal" pipe wrench, these can be purchased at mscdirect.com, they have a cam on them that grabs as its turned inside of a pipe.
With an Easy-Out.
To repair a PVC pipe, you can use a PVC pipe cutter to remove the damaged section, clean the area, apply PVC primer and cement, then connect a new piece of PVC pipe using a PVC coupling or repair fitting.
Lacquer thinner.
To fix a broken PVC pipe, you can cut out the damaged section using a hacksaw, clean the ends of the pipe, and then use PVC primer and cement to attach a new piece of PVC pipe or a coupling to the existing pipe. Make sure to follow the manufacturer's instructions for the primer and cement for a secure and leak-free repair.
To remove PVC fittings effectively, you can use a heat gun to soften the PVC material, making it easier to twist and pull the fitting off. Alternatively, you can use a PVC pipe cutter to cut the fitting off. Be sure to wear protective gear and follow safety precautions when working with PVC materials.