you have to remove the cooling fan to change the fan clutch. you need to loosen the fan shroud, be careful to remember the serpenting belp routing, maybe draw a diagram to remind you. 4 bolts holding the fan to the water pump, 4 bolts holding the clutch to the fan. this is how i did mine on a 5.0l Chevy truck
unscrew it
Remove the plug at the bottom or the rear of the radiator or remove the lower radiator hose
The wheels on a 1998 Chevy Silverado are 288 x 288. The first GMT800 Silverado/ Sierra were released in 1998 as 1999 models. The Chevy Silverado is available with either rear wheel drive or four wheel drive.
What transmission does a 1998 Chevy silverado 4x4 with vortec 350 in it have...it has a 4L60E OR 4L80E...60 HAS 17 BOATS AND 80 HAS 18
The board it'self might but the mounting brackets won't.
no,it wont.they are different sizes.just order it off of the internet.
You will need to remove Transmission, And you will see it in the bellhouseing. 4 bolts hold it in place.
There are none .
Silverado's are the more luxurious version. They have carpeted floors and leather seats. Cheyennes have vinyl interiors and bench / couch seats.
To remove the front brake caliper on a 1998 Chevy Silverado, you will typically need a T55 Torx bit. This size is used for the caliper mounting bolts. Always ensure you have the correct tools and verify the size, as variations may exist depending on specific models or aftermarket parts.
There are a variety of locations one can purchase a 1998 model Chevrolet Silverado. Some places one may find a 1998 Chevy Silverado include Auto Trader, eBay, and Auto Forum.
No it will not.